Replacement For Shelby Jack With Weld-On Mounting Bracket
Question:
I have an older Shelby 1000 lb trailer jack, that is shot, probably not heavy enough for the load. Model #D476461, with a welded-on mount, on a 2 X 4 frame Perfomance trailer. Id like to replace it with something a bit stronger - perhaps 1200 to 1500 lbs. Are there many the would be interchangeable with my existing weld mount? Thanks
asked by: Mike
Helpful Expert Reply:
We don't have the dimensions of the weld-on mount for your Shelby jack, but it looks similar to the Jack Mounting Bracket for Fulton Marine Jack - Weld-On # P9012-00. That mounting bracket uses a 1/2" bolt with pin holes measuring 3" apart center-to-center, so you'll want to compare your bracket's measurements.
If they are the same, you can use the following:
- Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs # FXP10W0301
Otherwise, your best option is to either have the # P9012-00 bracket welded on and use one of the aforementioned jacks, or to use a bolt-on jack such as the Fulton Round, Snap-Ring Swivel Marine Jack - Bolt On - Sidewind - 10" Lift - 1,200 lbs # FTJ12000101.
Products Referenced in This Question
Fulton Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Lift - Zinc - 1.2K
- Trailer Jack
- Boat Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- 10 Inch Lift
- Bolt-On
- With Wheel
- Fulton
more information >
Fulton Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Lift - Zinc - 1.2K
- Trailer Jack
- Boat Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- 10 Inch Lift
- Weld-On
- With Wheel
- Fulton
more information >
Product Page this Question was Asked From
Jack Mounting Bracket for Fulton Marine Jack - Weld-On
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Mounting Hardware
- Brackets
- Fulton
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Fulton Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Lift - Zinc - 1.2K
- Video: Review of Dutton-Lainson Trailer Winch - Brake Hand Winch - DL14730
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Shop: Tandem Axle Teardrop Trailer Fenders for Boat Trailers - Stainless Steel - 14" Wheels - Qty 2
- Shop: Dutton-Lainson Hand Winch - TUFFPLATE Finish - 2 Speed - Direct Drive - 2,000 lbs
- Video: Review of Dexter Brake Actuator - Replacement Master Cylinder Assembly - T1777401
- Video: Review of Fulton - Trailer Jack,Camper Jack - P9012-00
- Q&A: Magnum Series Jack Replacement For Boat Trailer
- Q&A: Replacing a Shelby 1,000 lbs Trailer Jack With a Similar Fulton Jack
- Article: How to Measure a Trailer Axle
- Video: Fulton Trailer Winch - Standard Hand Winch - F142401 Review
- Video: Fulton Trailer Jack - Side Frame Mount Jack - F1411300301 Review
- Shop: Triangular Equalizer for 1-3/4" Double-Eye Springs - 6" Long - 9/16" Center Hole
- Shop: Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers - Double Eye Springs
- Shop: 3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 25-1/4" Long
- Search Results: boat trailer fenders
- Search Results: fenders
- Search Results: equalizer
- Search Results: springs
- Search Results: shackles
- Search Results: safety chains
- Search Results: 3500 lb hub
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Video: Review of etrailer Trailer Fenders - Slant Back Tandem Axle Fender Kit - HP54VR
- Video: Review of Dexter Axle Trailer Leaf Spring Suspension - Spring Mounting Hardware - K71-448-00
- Q&A: Replacement Suspension Kit For A Dexter 13-10 Tandem Axle
- Article: How to Raise Your Travel Trailer Height
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Can 26 Inch Trailer Leaf Spring Be Replaced With 25-3/4 Inch Spring
- Article: How to Choose the Right Trailer Hitch Class