Replacement Boat Trailer Lights for 2-3/4" Rough Cutout and 2-1/4" Grommet
Question:
I have a boat trailer with round recessed side running lights. 2 yellow and 2 red. I cant find what seem to fit on your site. The round rough holes are 2 3/4 inches wide. The current grommets accept lights that are 2 1/4 wide. Please help. Thank you,
asked by: Kurt W
Expert Reply:
I have a solution for you, but we do not have any replacement lights that will fit in those grommets. Instead, you can use the LED Clearance or Side Marker Light # MCL002AXB (amber) and # MCL002RXB, which require a rough cutout dimension of 2-3/4", so they'll fit in your existing holes and provide you with the light solution you're looking for. These are waterproof LED lights so they're the perfect solution for a boat trailer as long as the rest of your lights are already LED.
If your boat has incandescent lights, you'll instead want to use the # MC55RB (red) and # MC57AB (amber) with the Cam-on Mounting Bracket # BK5557GB, which will cover up your existing rough holes and provide you with a mounting surface for these lights. These lights are submersible, but not waterproof, so they will have a drain hole in them-but they are designed for use on boat trailers.
All of these lights will require the use of a pigtail connector like the # A46PB or # A86PB to plug into the back of the lights and then connect to your trailer wiring.
I've linked some review videos on these lights that I recommend having a look at as well.
Products Referenced in This Question
Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 6" Lead
- Accessories and Parts
- Trailer Lights
- Wiring
- Plugs and Pigtails
- 6 Inch Long
- Two Wire
- Right Angle Pigtail
- Optronics
more information >
2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 18" Lead
- Accessories and Parts
- Trailer Lights
- Wiring
- Plugs and Pigtails
- 18 Inch Long
- Two Wire
- Right Angle Pigtail
- Optronics
more information >
Cam-On Mounting Bracket for 2" and 2-1/2", Round, Incandescent/LED Lights - Surface Mount
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- Brackets
- Gray
- Optronics
more information >
Optronics Clearance and Side Marker Trailer Light - Submersible - Incandescent - Round - Red Lens
- Trailer Lights
- Clearance Lights
- Rear Clearance
- Side Marker
- Round
- Recessed Mount
- Submersible Lights
- Incandescent Light
- 2-1/2 Inch Diameter
- Red
- Optronics
more information >
Optronics Trailer Clearance or Side Marker Light - Submersible - Incandescent - Round - Amber Lens
- Trailer Lights
- Clearance Lights
- Rear Clearance
- Side Marker
- Round
- Recessed Mount
- Submersible Lights
- Incandescent Light
- 2-1/2 Inch Diameter
- Amber
- Optronics
more information >
Product Page this Question was Asked From
LED Clearance or Side Marker Light w/ Reflector and Locking Clip - Submersible - Round - Amber
- Trailer Lights
- Clearance Lights
- Side Marker
- Round
- Recessed Mount
- Submersible Lights
- LED Light
- 3-3/28 Inch Diameter
- Amber
- Optronics
more information >
Continue Researching
- Shop: Trailer Light Mounting Bracket for 6-1/2" Oval Trailer Lights, Steel - Black Powder Coat
- Q&A: How to Cut a Grommet Hole for Installation of the Oval Trailer Tail Lights # STL22RB
- Q&A: Can Red Identification Light Bar be Used as Marker & Reverse Lights
- Q&A: Can Peterson Rectangular Clearance Light # M170A Replace Square Clearance Light on Trailer
- Q&A: Installing LED Clearance Lights With 2 Wires
- Q&A: Availability of The Peterson Piranha LED Clearance or Side Marker Light In Amber M170A and Red M170R
- Q&A: Replacement Kwikee 32 Series RV Steps for 1998 Bounder RV
- Q&A: Recommended Submersible Trailer License Plate Light With Bracket
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Trailer Wiring Diagrams
- Article: Adding Electric Over Hydraulic Disc Brakes