bing tracking image
Q & A Icon

The Touch Pad and Inside Controls are not Working on my Solera Awning. How do I Reset it?  

Question:

how do you unplug the controller to reset?

0

Expert Reply:

To reset the Solera Smart Arm 12V Power RV Awning part # LC517517 you will need to remove the upper motor cover of of the arm and there will be a connector there to take apart. With the cover still off plug it back in and try to operate it if it works put the cover back on. If it doesn't you will need to manually deploy the awning enough to get into the area behind the touch pad of the awning and undo the connectors there. There is a thin piece of plastic inside the channel that you remove to access this area. Doing this will be a complete reset.

Before doing this I would check to ensure it has power going to it. You can check for power behind the switch inside the camper using a test probe similar to LCD Digital Circuit Tester part # PTW2992

expert reply by:
0
Randy B

Products Referenced in This Question


Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>

^

Recently Viewed Products

About Us
photos and videos
1,056,204
Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570
Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511
Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+
Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
78
Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357
Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.