Is There a Replacement for a Shelby Jack 5856A That Uses Existing Bracket
Question:
I have a shelby 5856a-24z trailer jack top gear split 1 do you have gear kits? 2 it is a bolt thru jack..do you have a jack that i can put on that will use the current welded on bolt thru mount
asked by: Tom H
Expert Reply:
I do have an option for you but the Shelby trailer jack mounting bracket that you have welded to your frame won't be able to be reused with any newer jack. The Shelby trailer jacks did use similar designs in regards to mounting like the bolt-through and snap ring that some current jacks have but they are simply not cross-compatible. The bolt-through option for example from Shelby has a flat plate whereas the current models have a recessed portion.
Therefore, the best option for you would be to use a bolt-on jack, the Round Swivel Marine Jack w/ Wheel part # MJ-1200B unless you are willing to cut the old bracket off and weld a new one on that is. I don't have any way to look up old Shelby part numbers for specifics unfortunately.
Products Referenced in This Question
etrailer Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 11" Lift - Zinc - 1.2K
- Trailer Jack
- Boat Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- 11 Inch Lift
- Bolt-On
- With Wheel
- etrailer
more information >
Product Page this Question was Asked From
Fulton Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Lift - Zinc - 1.2K
- Trailer Jack
- Boat Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- 10 Inch Lift
- Weld-On
- With Wheel
- Fulton
more information >
Continue Researching
- Shop: Fulton Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Lift - Zinc - 1.2K
- Shop: etrailer Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 11" Lift - Zinc - 1.2K
- Shop: Fulton Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Lift - Zinc - 1.2K
- Shop: Dutton-Lainson Boat Trailer Jack w/ Wheel - Sidewind - 12" Lift - Black - 1.5K
- Shop: Fulton Boat Trailer Jack w/ Wheel - Weld On - Sidewind - Swivel - 10" Lift - 1.5K
- Q&A: Replacement Swivel Marine Jack for Shelby 5856A Model Jack
- Shop: Fulton XLT Bolt-Thru Swivel Trailer Jack - Weld On - Sidewind - 12" Lift - 1,500 lbs
- Video: Fulton Bolt-Thru Swivel Marine Jack Review F77CR
- Shop: Fulton Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 12" Lift - Zinc - 1.5K
- Video: Fulton Round Snap Ring Swivel Marine Jack Review
- Video: Dutton-Lainson Round Swivel Marine Jack Review
- Q&A: Shelby Jack Model 5856A Replacement Recommendation on Jet Ski Trailer
- Q&A: Does Extreme Off-Road Swing-Up Trailer Jack Fit 2 x 6 C-Channel Trailer Frame
- Video: Review of Fulton Trailer Jack - Weld On Sidewind Marine Jack - FXP100W0301
- Q&A: Does Bulldog Bolt Thru Trailer Jack Weld or Bolt to Trailer Frame
- Video: Review of Fulton Trailer Jack - 10 Lift 1,200lb Frame Mount Jack - F77CR
- Q&A: Bolt-On Trailer Swivel jack that Mounts to a Trailer Using 1 Center Bolt
- Video: Review of Fulton Trailer Jack - Side Frame Mount Jack - FXP10W0301
- Q&A: Fulton Swivel Jack Compatibility With Shelby Jack Welded Plate
- Video: Dutton-Lainson Sidewind Swivel Trailer Jack Review
- Q&A: Replacement Upgraded Jack For Shelby 5856A-24Z Trailer Jack Rated for 1,250LBS
- Search Results: dutton lainson jack
- Search Results: boat trailer jack
- Search Results: trailer jack
- Search Results: shelby
- Search Results: padlocks
- Search Results: lock
- Search Results: boating
- Shop: Suspension Enhancement