Fuse Bypass Solution for 2009 Buick Enclave When Flat Towing

Question

Question:

I have a 2009 Buick Enclave. The fuse to be removed is about a 1/2 inch sq 50 amp! looking for suggestions!?

asked by: Ken

0

Expert Reply:

The type of fuse that needs to be bypassed when flat towing your 2009 Buick Enclave is a 50 amp FMX type fuse which we have a bypass switch made for with the part # RM-76517 which would be a perfect solution.

expert reply by: Jameson C

0

Answer 1

Your 2011 Buick Enclave can be flat towed. I recommend starting with the Roadmaster EZ Crossbar Style Base Plate Kit - Removable Arms #523149-1 and then using the Roadmaster Falcon 2 Tow Bar #RM-520. You can then use safety cables #RM-643. The custom…

view full answer...

Answer 2

For your 50-amp fuse you can use Blue Ox ByPass Switch #BX88274 and for your 15-amp mini fuse Blue Ox #BX88272. The Roadmaster FuseMaster Fuse Bypass Switch #RM76514 that you referenced does provide 2-fuse bypass capability but its amperage rating…

view full answer...

Answer 3

The 2013 Buick Enclave requires two fuses to be pulled, a 50 amp BATT1 and a 20 amp UBEC per the technical service bulletin (TSB) 07-00-89-021P. In order to pull these fuses without needing to pop the cover and store them inside somewhere you can use…

view full answer...

Answer 4

Whether or not you can flat tow with a Jeep bumper is really up to the manufacturers testing; some of the big names like MetalCloak or Poison Spyder have bumpers with D-ring attachments that can be used for flat towing connections. This is great…

view full answer...

Answer 5

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 6

Yes, your 2017 Chevrolet Equinox FWD can be flat towed with all 4 wheels on the ground. Do understand that you will need to run your Equinox for 5 minutes every time you stop for gas to properly lubricate your transmission and before towing. A better…

view full answer...

Answer 7

Hey Michael, The Falcon 5250 has direct-connect attachment points that hook onto a crossbar, if you remove the crossbar adapter then you'll be able to go with a direct-connect baseplate like the #RM77ZR (models with tow hooks) or #RM76RR (models…

view full answer...

Answer 8

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 9

I would be happy to confirm the parts you referenced fit your 2019 Chevy Colorado and are compatible together. I have listed them below, along with any changes, and attached installation videos. Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar…

view full answer...

Answer 10

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Answer 11

You have a good eye Richard, as there is not a difference between the etrailer and Demco base plates that fit your 2024 Ford Maverick: - etrailer Invisible Base Plate Kit e64FV (discontinued) - Demco Tabless Base Plate Kit #DM77YV Both will fit your…

view full answer...

Answer 12

Gladly! The difference between the Blue Ox Patriot 3 Radio Frequency, Portable Braking System BRK2019 and the Blue Ox Patriot Radio Frequency, Portable Braking System #BLU37TR is that the Blue Ox Patriot 3 RBRK2019 is older, no longer available, and…

view full answer...