TruXedo Pro X15 Soft Tonneau Cover to Fit 2020 GMC Sierra 1500 with Multi-Pro Tailgate

Question

Question:

I got a new Sierra short bed with the multi tail gate. Does this cover work with the tailgate?

asked by: Eric

0

Expert Reply:

The TruXedo Pro X15 # TX1472601 fits your 2020 GMC Sierra 1500 as long as you have the 6-1/2 foot bed whether you have the Multi-Pro tailgate or not however, you won't be able to reach the grab handle which is a feature of that tailgate. Instead, use part # TX44FR for the version of the Pro X15 that allows access to the handle.

If you have the shorter 5-3/4 foot bed part # TX1472401 is the cover for Sierras without the Multi-Pro and part # TX64FR for those that do.

expert reply by: Charles S

0

Answer 1

Yes, the rail is notched on the #TX64FR so it will not interfere with the OEM tailgate handle on your 2024 Sierra. This cover is specifically designed to accommodate the handle and the MultiPro tailgate.

view full answer...

Answer 2

The TruXedo Pro X15, #TX1472601, that you linked to fits the 2021 GMC Sierra 1500 short bed truck but, this will interfere with features of the Multi-Pro tailgate. Instead, you need to order the TruXedo Pro X15 Soft Tonneau Cover, #TX44FR. This…

view full answer...

Answer 3

The TruXedo Pro X15 Soft Tonneau Cover - Roll Up - Polyester and Vinyl - Matte Black #TX1472601 will not work with the Multi-Pro tailgate handle, but the TruXedo Pro X15 Soft Tonneau Cover - Roll Up - Polyester and Vinyl - Matte Black #TX44FR will…

view full answer...

Answer 4

Yes, the TruXedo Pro X15 Soft Tonneau Cover #TX64FR for a 5-3/4' bed or part #TX44FR for a 6-1/2' bed will work just the same on your 2022 GMC Sierra 1500 Limited AT4 and allow you access to the assist handle on the inside of the tailgate.

view full answer...

Answer 5

I confirmed with TruXedo that the TruXedo Pro X15 Soft Tonneau Cover #TX1473301 would not interfere with the powered tailgate on your 2024 Chevy Silverado 2500. If the tailgate was closed you would have to open it to close the cover though.

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 12

I have a solution for you Travis as Pace Edwards does not offer a contractor rack for your 2023 GMC Sierra 1500. Instead you can use the Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover #311-M-FMCA28A59 with the Thule TracRac SR…

view full answer...