Is There a Timbren Front End Suspension Enhancement for the 2018 Nissan Titan xD

Question

Question:

Can we get front timbrens only ...???

asked by: Bill T

0

Expert Reply:

Yes. There are Timbren SES available for the front axle of your 2018 Nissan Titan xD using part # TFXF1004A. This Timbren kit is designed for Nissan Titan xD's with heavy off-road front bumpers or snow plows that can create situations where your front suspension might be sagging. This Timbren kit installs easily without drilling and will provide a more comfortable ride by absorbing road shock and improving roll stability.

You can install a Timbren kit on the front axle and nothing on the rear axle to help combat additional weight at the front of your truck.

expert reply by: Erik B

0

Answer 1

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

I do have an option for you, but we do not carry the Dexter 072-027-00 you mentioned. However we do have the etrailer Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long #e64SR which will be 3/8" shorter but that is still close…

view full answer...

Answer 4

Personally I wouldn't go with Timbren's for your needs. They're essentially rubber bump stops that prevent your suspension from flexing when weights placed on the rear of your Canyon. The major issue with them is comfortability when you…

view full answer...

Answer 5

The Trailer and Vehicle Electric Winch Wiring Kit #BDW20207 on your Badlands 12,000 winch will work well. The 2 AWG wire will be adequate for your winch as it is confirmed to work on Superwinch winches up to 16.5k in capacity.

view full answer...

Answer 6

The advantage of the AirLift air spring systems that have an internal jounce bumper is that in the event of an air leak your Ram 1500 would not lose all of the extra suspension support. You would still have the internal jounce bumper as a fail-safe…

view full answer...

Answer 7

In regards to the Curt A16 Slider 5th Wheel Trailer Hitch part #C16521 with Adapter Rails for Curt 5th Wheel Hitch part #C88KR, the weight capacity is 16,000 lbs. Therefore, so long as the trailer does not exceed this you'll be fine. If you want…

view full answer...

Answer 8

The BulletProof Hitches replacement ball, part #358REPLACEMENTBALL, is designed specifically to fit BulletProof products. It may fit some others but not the Curt shank you're looking at. You can't see it in the picture on the page (There…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…

view full answer...

Is There a Timbren Front End Suspension Enhancement for the 2018 Nissan Titan xD

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching