Trailer Hitch Recommendation for 2020 Subaru Forester

Question

Question:

What it the best hitch for the 2020 Subaru Forester? What would you recommend, I'm completely new at this...

asked by: John A

0

Expert Reply:

For your 2020 Subaru Forester, I'd recommend going with a Class III hitch with a 2 inch receiver opening, as there's a much greater selection of available hitch mounted accessories such as bike racks and cargo carrying trays for that receiver size. There are two Class III hitch types available for your Forester, one from EcoHitch, part # 306-X7391 that would have the hitch crossbar completely concealed behind the vehicle's bumper leaving only the receiver tube and the safety chain loops visible. The other option would have the entirety of the hitch, crossbar, receiver tube and safety chain loops fully visible like the Curt # C13409 and the Draw-Tite # 76271.

Between the visible choices, I'd personally prefer the Curt, because I've found their powder coating to be a bit nicer and more durable.

As far as choosing between the visible and the mostly concealed hitch options, which to choose will depend on how important the appearance of the hitch is, and whether or not you'd be willing to pay the premium price for the concealed # 306-X7391 EcoHitch model.

If you'll be towing with the hitch, you'll need a trailer wiring harness, a ball mount and the proper sized trailer ball to complete your towing system. For a wiring harness, use the # C56040 from Curt. For a ball mount, use # C45010 and for a trailer ball, use # 19260 for a 1-7/8 inch ball or # 63845 for a 2 inch.

I've linked install videos for the hitches and the wiring harness mentioned above.

expert reply by: Mike L

0

Answer 1

What sets the EcoHitch #306-X7391 receiver apart from the other two options is that it's going to be completely hidden behind your bumper. The only portion that is visible is the 2 inch square receiver. So, if looks are important to you, this…

view full answer...

Answer 2

Yes, the EcoHitch trailer hitch receiver is indeed a direct fit for your 2022 Subaru Forester Wilderness; the correct part number for your vehicle is the following: - EcoHitch Hidden Trailer Hitch Receiver #306-X7391 The EcoHitch #306-X7391 is…

view full answer...

Answer 3

There are a few differences to consider between the Draw-Tite - 2" #76271 and the EcoHitch - 2" #306-X7391 for your 2021 Subaru Forester. The first thing to keep in mind is the installation difficulty. The installation of the…

view full answer...

Answer 4

To add a hitch to your 2024 Subaru Forester, I recommend the etrailer item #e83ZR. This hitch is custom fit and bolts to your Subaru with included hardware. The etrailer Hitch item #e83ZR is a class III hitch with a 2" receiver. It has a 3,500…

view full answer...

Answer 5

For your 2022 Subaru Forester, we have the EcoHitch Hidden Trailer Hitch Receiver #306-X7391 that will fit all models of the Subaru Forester Wilderness. This hitch has a maximum GTW of 3,500-lbs and a maximum tongue weight of 525-lbs. When installed,…

view full answer...

Answer 6

While both hitches look and install very similarly, I recommend the EcoHitch Hidden Trailer Hitch #306-X7391 for your 2020 Subaru Forester over the Curt Hidden Hitch #C47HR. Both have the same towing weight capacity of 3,500 lbs, but EcoHitch…

view full answer...

Answer 7

The most hidden trailer hitch we offer for your 2020 Subaru Forester is the EcoHitch part #306-X7391 which only has the hitch opening that hangs below the rear bumper. This gives it the least visible appearance and also helps with ground clearance. I…

view full answer...

Answer 8

It's not by much but the EcoHitch part #306-X7391 is more hidden than the Curt hitch part #C47HR due to the smaller safety chain loop portion of the hitch. The loops on the EcoHitch are a bit smaller since they are vertical and recessed compared…

view full answer...

Answer 9

There is a hidden trailer hitch that will fit your 2020 Subaru Forester, the EcoHitch Hidden Trailer Hitch Receiver #306-X7391. I have added a pair of photos that our customers sent in showing this hitch installed on their Forester so you can see…

view full answer...

Answer 10

The Curt #C47HR and EcoHitch #306-X7391 receivers you found do have a lot of similarities. First they are both made in the USA and have a lifetime warranty. Both have a 2" receiver and hidden cross tube which mounts behind the rear bumper…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Trailer Hitch Recommendation for 2020 Subaru Forester

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching