Replacing Trailer Buddy 32220 Reverse Solenoid on Ranger Boat Trailer
Question:
I have a Ranger boat trailer with surge disc brakes. The whole system is about 12 years old - Tie-Down 70LP surge actuator, Trailer Buddy 32220 reverse solenoid, and Tie-Down 46304 calipers. One of the calipers is sticking and causing the rotor to overheat. I had a trailer repair guy look at it and he suggested replacing all three components. I can do the actuator/master cylinder and calipers myself without much trouble, But I understand that the solenoid part is no longer made. The one I have mounts on a steel plate protruding from the trailer frame and is located about two feet from the actuator. Ive been told that it can be replaced by UFP part 34500, but that part does not have the two holes on the bottom of the switch to mount it from underneath. Ill attach pics of my mine - one from the top and the bottom. My question is....Do you have any suggestions for mounting the switch so that it doesnt bounce around, which Im afraid will cause leaks at the connection points. Ignore the obvious brake fluid on the switch in my pics. I unscrewed the top to see if I could get to the inside to perhaps clean it.
asked by: Richard L
Expert Reply:
We actually have the Brake Buddy 32220 reverse solenoid available with the Titan Solenoid Valve Replacement Kit # TK71-755-00. The solenoid itself would be an exact replacement and it features the two mounting holes at the bottom like you described (see attached images).
You will be able to use this with your existing mounting bracket without issue. I have included a short video review below that you can check out as well.
Product Page this Question was Asked From
Solenoid Valve Replacement Kit for Dexter Brake Actuators with Reverse Lockouts
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Solenoid Valve
- Valve
- Dexter
more information >
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Search Results: door latch
- Shop: Fifth Wheel Hitch
- Shop: Motor Upgrade Kit for Kwikee Electric RV Steps
- Shop: Base Plate for Tow Bar
- Shop: Global Link Vise Lock for Cam-Action Door Latch - Keyed Alike Option - White
- Q&A: Availability of 7-1/2-inch-long V-Shaped Replacement Keel Roller for Boat Trailer
- Shop: Solenoid Valve Replacement Kit for Dexter Brake Actuators with Reverse Lockouts
- Shop: Front Mount Hitch
- Shop: LED Trailer Fender Light - 2 Diodes - Amber and Red Lens
- Q&A: LED Trailer Taillight Recommendation for a 3110 Feather Lite Car Trailer
- Search Results: dg52438vp
- Search Results: mcl65rb
- Search Results: tail light
- Search Results: trailer running lights
- Search Results: mcl
- Search Results: wraparound tail light
- Shop: LED Tail Light for Trailers Over 80" Wide - 7 Function - Submersible - 17 Diodes - Passenger
- Shop: Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Shop: Optronics Thinline LED Trailer Clearance or Side Marker Light - Submersible - 4 Diodes - Red Lens
- Shop: Suspension Enhancement
- Shop: Vehicle Tow Bar Brake System
- Video: Roadmaster InvisiBrake Braking System Installation - 2020 GMC Canyon
- Q&A: Replacing Trailer Actuator Buddy 32220 Reverse Solenoid on Triton Bass Boat Trailer
- Q&A: Replacement Clearance Lights Needed for GLO-BRITE 122R and 122Y Lights
- Q&A: Wiring Diagram for 7-Way Round Pin Trailer and Vehicle Side Connectors
- Q&A: Converting From 7-Way Round to 7-Way Flat Connector
- Video: Best 2017 Toyota Sienna Trailer Hitch Options
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2016 Jeep Renegade
Michael B.
8/3/2020
Can I get just the solenoid ? What comes in the kit ?