Can Sway Control Adapter Plate # RP26003 Be Used on the Left or Right Side

Question

Question:

Can this plate be used on the left side as well as the right side of the hitch.

asked by: Bob N

0

Expert Reply:

I do have an option that will allow you to use a sway control bar on the left side of a ball mount, however, the Reese Sway Control adapter plate # RP26003 is designed to be used on the right side only.

To be used on the left side, this plate would have to be turned upside down and the lip on the bottom of the plate would not allow the hitch ball to be completely tightened to the plate and the lip would interfere with the operation of the sway control bar.

To use a sway control bar on the left side of a ball mount, you would use the weld on sway control tab, part # 3442, and weld it to the left side of the ball mount. Any time welding is involved, we recommend having a qualified welder complete the job.

expert reply by: Mike L

0

Answer 1

If your 1-1/4 inch hitch is on a 2008 Chevy HHR then it is a Class I hitch. You can identify a Class I based on the tongue weight and gross trailer weight capacities. A Class I hitch will top out at 200 pounds tongue weight capacity and 2,000…

view full answer...

Answer 2

The handle is actually the on/off switch for the unit and the bolt under the handle is the tension adjustment bolt. You will need to turn the On/Off handle clockwise (tighter) until the handle will stay firmly in place parallel with the main body…

view full answer...

Answer 3

You can detach the harness from the Tekonsha P3 brake controller by gently pulling up on the tab shown in the photo while pulling rearward on the connector. You'll want to do this gently, so the tab doesn't break. The same holds true…

view full answer...

Answer 4

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb…

view full answer...

Answer 5

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 6

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 7

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 8

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 9

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 10

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 11

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Can Sway Control Adapter Plate # RP26003 Be Used on the Left or Right Side

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching