Toyota Highlander LE Plus 2019 FWD Trailer Hitch

Question

Question:

Hi, What trailer hitch would you recommend that best fit for Toyota Highlander LE plus 2019 FWD?

asked by: Matiullah G

0

Expert Reply:

We have multiple great hitch options that will fit your 2019 Toyota Highlander LE but I recommend our etrailer.com hitch # e98844 that comes in a more durable matte black finish. The cross tube is more visible but the etrailer is designed for higher capacity towing though you really can't tow more than your vehicle allows with either option.

Included are video resources and attached customer install images to help inform your decision.

expert reply by: Patrick R

0

click to enlarge

Answer 1

To determine if a 2017 Toyota HIghlander has a factory towing harness, start by opening up the rear hatch. Then, lift up on the rear compartment panel and pull it out. Remove the two driver-side panels by pulling up on them. There, you may see a…

view full answer...

Answer 2

The best wiring harness for your 2018 Toyota Highlander is the Tekonsha T-One Vehicle Wiring Harness #118449. That is assuming you do not have the factory tow package. When it comes to wiring, we have found Tekonsha to be the most reliable. This…

view full answer...

Answer 3

The spare tire for a 2019 Toyota Highlander is stored under the vehicle. If you check out the attached installation video for the etrailer Trailer Hitch Receiver #e98844 you can see the empty location under the vehicle where the spare tire should…

view full answer...

Answer 4

Yes the etrailer hitch #e98844 is a confirmed fit for your 2015 Toyota Highlander LE Plus.

view full answer...

Answer 5

You have spotted the one and only difference between the etrailer Class III Trailer Hitch #e98844 and the Curt #C13200. Absolutely everything except the finish is identical on these trailer hitches, including how they install and where they sit in…

view full answer...

Answer 6

You are correct that the bike racks we offer are designed to work with hitch receivers that have either 1-1/4 or 2 inch openings. I spoke with one of our other Experts who said a hitch that had a 1/2 dimension was used several years ago on some…

view full answer...

Answer 7

We do have an etrailer hitch for your 2018 Toyota Highlander, part #e98844, which fits both the Hybrid and gas models. This installs without drilling and it fits with a full-size spare tire so long as it is on a steel rim. The linked installation…

view full answer...

Answer 8

For your 2017 Toyota Highlander that has a full sized spare, I recommend the Draw-Tite Class IV Max Frame Round Tube Receiver Hitch #DT65MR. This hitch is custom-fit for your vehicle and will allow your full size spare tire to remain stowed under the…

view full answer...

Answer 9

If you click the provided link, you can see an install video showing the etrailer brand #e98844 being installed on a 2015 Toyota Highlander like yours. According to the linked installation instructions, you'll need the following tools: • Ratchet…

view full answer...

Answer 10

This Hopkins wiring harness does fit your 2019 Toyota Highlander. Since the location of the factory wiring is located inside the car and not under/behind the bumper, you will likely be limited to the current location of the wiring. That being said,…

view full answer...

Answer 11

I would be happy to help! The differences between the Curt Trailer Hitch Receiver #C13394 and #C13200 for your 2019 Toyota Highlander are that the #C13394 has a hidden cross tube meaning once installed the only visible section of the hitch will be…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...