Highest Capacity Trailer Hitch for 2019 Ford F-250

Question

Question:

What is the highest capacity trailer hitch you have for my 2019 Ford F-250?

asked by: Daniel

0

Expert Reply:

The highest capacity trailer hitch we offer for your 2019 Ford F-250 is the Curt Class V hitch part # C15802 which has the towing capacity of 20,000 lbs and a tongue weight capacity of 2,700 lbs. It has a 2-1/2 inch hitch opening size and is also made in the USA!

expert reply by: Jameson C

0

Answer 1

With the Curt hitch part #C15802 installed on your 2017 Ford F-250 you will definitely have a higher capacity hitch that would not be the weak point in your towing setup. It can't give you more capacity than the truck has but the added…

view full answer...

Answer 2

Yes, the Curt Trailer Hitch Receiver #C15802 does fit your 2022 Ford F-250 Super Duty. This is a class V hitch with a gross towing weight of 20,000lbs and a maximum tongue weight capacity of 2,700lbs. If you need a ball mount, a great option is the…

view full answer...

Answer 3

To add a 20,000 lbs capacity hitch to your 2023 Ford F-250, I recommend the Curt Trailer Hitch item #C15802. This hitch is custom fit and bolts to your F-250 with included hardware. It has a 2-1/2" receiver and a 20,000 lbs towing capacity. This…

view full answer...

Answer 4

Yes. For your 2017 Ford F-250 6.7L diesel, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" #C15802 which is rated for tongue weights up to 2,700 lbs. This won't increase the tongue weight range of…

view full answer...

Answer 5

In your case, you will have to follow the tongue weight rating of your 2017 Ford F-250. The tongue weight rating on the Curt Trailer Hitch receiver, #C15802, is the weight that this particular hitch will fail and does not represent the total towing…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 8

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 9

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Normal operating temperatures for drum brakes range from 150-400 degrees F. During certain stopping conditions the brake heat can exceed 600 degrees. The effectiveness and stopping power of the brakes is significantly reduced at these higher…

view full answer...

Answer 12

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Highest Capacity Trailer Hitch for 2019 Ford F-250

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching