Showing 12V Power On The Red Wire From Tekonsha Prodigy P3 Pigtail
Question:
My tekonsha p3 will not power on. On the harness that plugs into the back of it I have +12V on the red wire and Ground on the Black wire. Should the +12 and Ground be reversed?
asked by: John W
Helpful Expert Reply:
It sounds like you are hardwiring the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195. The red wire should only show power at the brake controller when the brake pedal is depressed. It should be connected to the stop light wire on above the brake pedal that only shows power when the brake is depressed. If it is showing power when the brake pedal is not depressed than it is not connected to the correct wire at the brake pedal.
The 12V should be showing on the black wire which is connected to the positive side of the battery via a circuit breaker. The white is the ground which should not show power if grounded to the negative side of the vehicle's battery. I have attached a diagram to help to install the brake controller. You may consider using a plug and play adapter if there is one available to bypass the hard wiring. If you let me know your year make and model I am happy to see if there is one available.
Product Page this Question was Asked From
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Search Results: adapter
- Video: Tekonsha Prodigy P3 Trailer Brake Controller Review
- Search Results: prodigy p3
- Search Results: military discount
- Shop: Gen-Y Hitch Reducer Sleeve - 2-1/2" to 2" - 5-1/2" Long
- Q&A: Semi Trailer Light Function Locations on Heavy Duty 7-Way Pin Connection
- Shop: Trailer Wiring
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Video: Tekonsha Prodigy P3 Trailer Brake Controller Installation - 2022 Jeep Wagoneer
- Shop: Adapter 4-Pole to 7-Pole and 4-Pole
- Shop: Redarc Tow-Pro Liberty Brake Controller - Dash Knob - 1 to 2 Axles - Proportional
- Video: Choosing the Right Brake Controller
- Article: Brake Controller Installation: Starting from Scratch
- Video: Tekonsha Prodigy P3 Trailer Brake Controller Installation - 2020 Ford E-Series Cutaway
- Search Results: prodigy 3
- Video: Trailer Brake Controller Installation - 1993 Chevrolet Suburban
- Q&A: Are Additional Fuses Required for Installation of Tekonsha Prodigy P3 on 2002 Chevy Avalanche
- Q&A: What is the Air Pressure Rating for a 4.80-12 Load Range C Trailer Tire
- Q&A: How To Turn Off The Tekonsha Prodigy P3 Brake Controller # 90195
- Q&A: Where Is the Brake Controller Port On An Entegra Coach Vision Motorhome
- Q&A: Voltage Readings with the Tekonsha Prodigy P3 Brake Controller
- Q&A: Installation of Prodigy P3 Brake Controller to Bypass Factory Trailer Brake Controller in 2007 Chevy
- Search Results: trailer battery charger
- Shop: Tekonsha Primus IQ Trailer Brake Controller - 1 to 3 Axles - Proportional
- Shop: BrakeBuddy Towed Vehicle Battery Charge Line Kit
- Shop: RV Mattress
- Shop: RV Camera