What Is the Tongue Weight Rating of the Buyers Products Adjustable Tri-Ball Hitch

Question

Question:

Do you know the tongue weight for the balls?

asked by: Isaiah W

0

Expert Reply:

The tongue weight of the hitch balls on the Buyers Products Adjustable Tri-Ball Hitch part # 3371802225 is going to be 600 lbs for the 1-7/8" hitch ball, 750 lbs for the 2" hitch ball, and 1,000 lbs for the 2-5/16" hitch ball.

expert reply by: Conner L

0

Answer 1

No, it is not safe to use a 1-7/8 inch ball with a trailer that has a 2 inch ball coupler. Most couplers have an adjustment for the latching mechanism that may solve your issue. If you are hooking and unhooking on a surface that is not level,…

view full answer...

Answer 2

If your trailer has a 2 inch coupler then you definitely need to go with a 2 inch ball. Even though 1/8 inches doesn't sound like very much, it is enough that your trailer could come uncoupled under the right conditions. I have attached a link to…

view full answer...

Answer 3

The distance from the hitch pin hole to where the gusset meets the shank on the Curt #D900 is 4-1/4". Whether or not this will work will depend on how far down your hitch hangs. The greatest amount of clearance from the hitch pin hole is 7"…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 6

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 7

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

We do carry electric brake assemblies as well as hub/drum assemblies. To determine the correct fit, you will need to measure the spindles of your axles. I've attached a photo to assist with the measurement locations, and recommend using a digital…

view full answer...

Answer 10

You can get a new brake mounting flange for your axle. The old flange will need to be cut off. The part is #4-44-1. This is designed to fit a 3 inch trailer axle and should be welded in place by a professional. Since you would also have to get the…

view full answer...

Answer 11

In regards to the Correct Track Trailer Alignment and Lift Kit part #RR23QX, the kit provides a lift by essentially extending the hangers. This normally requires cutting off the old hangers and welding on new, taller ones but with this kit you…

view full answer...

Answer 12

The Correct Track Trailer Alignment and Lift Kit - Tandem Axle #RR23QX does come with all of the components needed to lift a tandem axle trailer. The center hangers of a tandem axle setup use different components than the front and rear hangers since…

view full answer...

What Is the Tongue Weight Rating of the Buyers Products Adjustable Tri-Ball Hitch

Product Page this Question was Asked From

Continue Researching