How Far Apart Should the Leaf Spring Hangers Be Spaced With a 26 Inch Long Leaf Spring
Question:
I have a 26 inch leafspring SP-051275 and i have the hanger kit APS4. I was researching and think 25 1/2 hanger spacing is correct but was hoping you could confirm before i weld them up. thanks
asked by: Jason
0
Products Referenced in This Question
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Single Axle
- etrailer
more information >
Product Page this Question was Asked From
6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles - 26" Long
- Trailer Leaf Springs
- Double Eye Springs
- 4500 lbs
- 1-3/4 Inch Wide
- 6 Leaf
- 26 Inch Long
- Painted
- etrailer
more information >
Continue Researching
- Shop: CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Search Results: leaf spring
- Search Results: shackle strap
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: Shackle Bolt for 1-3/4" Wide Double Eye Springs - 9/16" Bolt Diameter - 3" Long
- Shop: Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Shop: Shackle Strap - 2-1/4" Long
- Shop: Replacement Shackle Strap - 2-5/8" Long
- Shop: Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers - Double Eye Springs
- Shop: 3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 25-1/4" Long
- Q&A: Typical Trailer Suspension Hanger Spacing Relative to Leaf Spring Size
- Q&A: How Much Should a Leaf Spring Bend and How Much Distance Should Be Between Axle and Trailer
- Q&A: Will a 26" Long Trailer Leaf Spring Work to Replace a 25-1/2" Long Trailer Leaf Spring
- Q&A: Why Do Trailer Leaf Springs with the Same Capacity have Different Lengths
- Search Results: leaf spring suspension
- Search Results: double eye springs
- Search Results: winch strap
- Search Results: boat trailer winch strap
- Article: Double-Eye Trailer Suspension System Review
- Search Results: springs
- Q&A: Hanger Spacing for Installing 26 inch Long Leaf Springs with Hanger Kit APS3
- Q&A: What are the Proper Components Needed to Install the Leaf springs On a Trailer
- Q&A: How to Determine the Distance for Mounting Trailer Spring Hangers on a Single Axle Trailer
- Article: How to Raise Your Travel Trailer Height
- Video: etrailer Trailer Suspension - Leaf Spring Suspension - APS4 Review
- Video: MORryde X-Factor Crossmember Installation - 2020 Grand Design Momentum 5W Toy Hauler
- Video: SumoSprings Trailer Helper Springs Review
- Video: etrailer Trailer Suspension - Leaf Spring Suspension - 93003-3X Review
- Article: Slipper Spring Trailer Suspension System Review
- Article: Trailer Wiring Diagrams
Mark P.
2/29/2020
I am not sure if I need the 4 leaf 25 in springs or the 4 leaf 26 in springs. I have the 2 square axle tubing for my 19ft boat. It is a 1999-2000 Wesco trailer. My springs are flat and everything is rusted. I recently purchased new 2square mounting bolts and the links from you guys, but still not confident in the proper spring size other than I know they are 4 leaf. The original hangers are in good shape and still mounted. The back hanger is narrower than the front which bolts directly through the spring. I need 2 new bolts for the rear hanger that just bolts through the hanger and the links. Are they shorter than the lower bolts that go through the spring and links on each side? Thank you.