Best Trailer Hitch For 2020 Kia Telluride

Question

Question:

I've been trying to find a trailer hitch for the Telly. 2020. I have a small cargo carrier with 2 inch shank Don't want to buy factory help dont need wiring

asked by: betty T

0

Expert Reply:

I recommend the Curt Trailer Hitch Receiver part # C13420 for the 2020 Kia Telluride which is a Class III hitch and a very easy installation that does not require drilling. This hitch will give you about 15-1/2" of ground clearance which will come in handy when the cargo carrier is attached it will be less likely to ever drag the ground in low ground clearance driving conditions. I have attached an installation video for your reference.

If you decide you need the wiring in the future, I recommend Curt T-Connector Vehicle Wiring Harness for Factory Tow Package part # CU94FR. I have attached an installation video for the wiring as well.

expert reply by: Heather A

0

click to enlarge

Answer 1

The best hitch for your 2023 Kia Telluride is the etrailer Hitch item #e45ZR. This hitch is custom fit and bolts to your Kia with included hardware. The reason this is the best hitch is because it bolts directly to your frame and mounts above your…

view full answer...

Answer 2

While ideally, the flange would be flush against the frame, this does not look like anything out of the ordinary. These hitches are made of a mild flex steel and are designed to bend. Looking at the structure of this hitch, it is likely that we do…

view full answer...

Answer 3

We do have a trailer wiring harness that fits your 2023 Kia Telluride XLine and is similar to the 119190 kit which is no longer available. We have installed this on a '23 Telluride XLine so we know it works, and it is essentially the same thing…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 9

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 12

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Best Trailer Hitch For 2020 Kia Telluride

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching