Difference in Dimensions Between P313 and P333 Hitch Receiver Insert for Swagman Bike Racks
Question:
Hi Carla, Thanks for the specs. I have a Swagman Trailhead 2 with a 2" adapter. The hitch pin was lost and the receiver insert was damaged by the use of a replacement bolt that was too small. From your website we ordered: P313 Replacement Receiver Insert for Swagman Bike Racks - Hitch End P5901 Replacement Threaded Hitch Pin and Clip for 2" Shanks on Swagman Bike Carriers but they are not compatible and I am trying to rig a workable solution. Any suggestions are appreciated.
asked by: David H
Expert Reply:
I went out to our warehouse and took some measurements for you. The # P313 Replacement Receiver Insert measures 1.31 in x 0.87 in while # P333 measures a bit smaller at 1.30 in x 0.75 in. See the attached images.
# P313 is designed to replace the original insert in these Swagman hitch mounted bike racks:
Swagman XC # S64650
Swagman G10 # S64682 (discontinued)
Swagman Trailhead # S63360
# P333 is designed to replace the original insert in these Swagman hitch mounted bike racks:
Swagman XTC2 # S64670
Swagman XTC2 TILT # S64671
Both use the same 1/2 inch threaded pin # P5902 or # S64029 for the locking version.
![Carla M](https://images.etrailer.com/static/images/catg/people/521_tn.jpg)
Products Referenced in This Question
Replacement Receiver Insert for Swagman Bike Racks - Hitch End
- Accessories and Parts
- Hitch Bike Racks
- Hitch
- Receiver Insert
- Chinook
- G10
- Trailhead
- XC
- Swagman
more information >
Replacement Threaded Hitch Pin and Clip for 2" Shanks on Swagman Bike Carriers
- Accessories and Parts
- Hitch Bike Racks
- Pins and Clips
- Swagman
more information >
Replacement Threaded Hitch Pin and Clip for 1-1/4" Shanks on Swagman Bike Carriers
- Accessories and Parts
- Hitch Bike Racks
- Pins and Clips
- Trailhead
- XC
- XTC
- Swagman
more information >
Swagman Trailhead Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Tilting
- Hitch Bike Racks
- Hanging Rack
- Folding Rack
- Tilt-Away Rack
- Frame Mount
- Locks Not Included
- 2 Bikes
- Class 1
- Class 2
- Class 3
- Fits 1-1/4 and 2 Inch Hitch
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- Swagman
more information >
Swagman Trailhead Bike Rack for 4 Bikes - 1-1/4" and 2" Hitches - Tilting
- Hitch Bike Racks
- Hanging Rack
- Folding Rack
- Tilt-Away Rack
- Frame Mount
- Locks Not Included
- 4 Bikes
- Class 1
- Class 2
- Class 3
- Fits 1-1/4 and 2 Inch Hitch
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- Swagman
more information >
Swagman Trailhead RV Bike Rack for 4 Bikes - 2" Hitches
- RV and Camper Bike Racks
- Hanging Rack
- RV Hitch Rack
- Frame Mount
- Locks Not Included
- 4 Bikes
- Childrens Bikes
- Cruiser Bikes
- Mountain Bikes
- Road Bikes
- Womens Bikes
- Fits 2 Inch Hitch
- Motorhome
- Travel Trailer
- Fifth Wheel
- Flat-Towed Vehicle
- Swagman
more information >
Locking Anti-Rattle, Threaded Hitch Pin for Swagman 2" Hitch Racks
- Trailer Hitch Lock
- Rack Specific Locks
- Keyed Unique
- Chrome
- Fits 2 Inch Hitch
- Threaded Pin
- For Swagman Racks
- 4-1/2 Inch Span
- Swagman
more information >
Locking Anti-Rattle, Threaded Hitch Pin for Swagman Hitch Racks
- Trailer Hitch Lock
- Rack Specific Locks
- Keyed Unique
- Chrome
- Fits 1-1/4 and 2 Inch Hitch
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- Threaded Pin
- For Swagman Racks
- 4-3/8 Inch Span
- Swagman
more information >
Swagman XC2 Bike Rack for 2 bikes - 1-1/4" and 2" Hitches - Frame Mount
- Hitch Bike Racks
- Platform Rack
- Folding Rack
- Frame Mount
- Locks Not Included
- 2 Bikes
- Class 2
- Class 3
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- Fits 1-1/4 and 2 Inch Hitch
- Swagman
more information >
Swagman XTC2 Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
- Hitch Bike Racks
- Platform Rack
- Folding Rack
- Frame Mount
- Locks Not Included
- 2 Bikes
- Class 2
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- Fits 1-1/4 and 2 Inch Hitch
- Swagman
more information >
Swagman XTC2 TILT Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
- Hitch Bike Racks
- Platform Rack
- Tilt-Away Rack
- Frame Mount
- 2 Bikes
- Class 2
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- Fat Bikes
- Swagman
more information >
Product Page this Question was Asked From
Replacement Receiver Insert for Swagman XTC and XTC-2 - Hitch End
- Accessories and Parts
- Hitch Bike Racks
- Hitch
- Receiver Insert
- XTC
- Swagman
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Can You Use Bike Rack on Back of Motorhome with Blue Ox Tow Bar and KarGard
- Q&A: Replacement Hitch Threaded Insert for Swagman Chinook Bike Rack
- Q&A: How to Keep Swagman 4 Bike Rack From Wobbling in Receiver Hitch
- Q&A: How to Protect a Toad from Chips or Scratches While in Tow
- Article: Anti-Rattle Devices
- Q&A: How Thick Is the Steel on the Replacement 2" Shank for Swagman XC Series 2 Bike Carriers
- Q&A: Replacing A Broken Hitch Pin Bolt On The Swagman XC2 Bike Rack for 2 bikes
- Q&A: Troubleshooting Installation Of A Swagman Traveler XC2 Bike Rack On A Trucks 2 Receiver
David H.
9/20/2019
Hi Carla, Thanks for the specs. I have a Swagman Trailhead 2 with a 2" adapter. The hitch pin was lost and the receiver insert was damaged by the use of a replacement bolt that was too small. From your website we ordered: P313 Replacement Receiver Insert for Swagman Bike Racks - Hitch End P5901 Replacement Threaded Hitch Pin and Clip for 2" Shanks on Swagman Bike Carriers but they are not compatible and I am trying to rig a workable solution. Any suggestions are appreciated.