Triple Axle Brake Line Kit that Uses 1/4 inch Main Feed Line
Question:
So the last issue is the flex hoses going to the calipers. I will need hoses with a 90 bend at the caliper end. Again, your kit shows them as straight. Part #'s would be great. Prob about 18", with stainless fittings. Thank you for your patience.
asked by: Keith D
Helpful Expert Reply:
Having the slightly larger main feed line of 1/4 inch is a a great idea for plumbing up your triple axle trailer. We have the HydraStar kit part # HS496-153 which is designed for that. This kit uses 1/4 for the main feed line to the first tee fitting and then from there reduces to the smaller 3/16 inch size but this kit was designed for heavier trailers like yours so it will still work really well and you won't have any issues with brake performance. I attached a diagram that shows how it installs as well.
Products Referenced in This Question
Hydrastar Hydraulic Brake Line Kit - Triple Axle - 15' Long, 1/4" Main Line
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- 15 Feet Long
- Brake Lines
- Steel Line and Flexible Hose
- Brake Line Kits
- Triple Axle
- Hydrastar
more information >
Dexter Hydraulic Brake Line with Fittings - 17-3/4" Long
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- 17-3/4 Inch Long
- Brake Lines
- Flexible Brake Hose
- Brake Line Components
- Dexter
more information >
Product Page this Question was Asked From
Hydrastar Hydraulic Brake Line Kit - Tandem Axle - 25' Long, 3/16" Main Line
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- 25 Feet Long
- Brake Lines
- Steel Line and Flexible Hose
- Brake Line Kits
- Tandem Axle
- Hydrastar
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Hydrastar Hydraulic Brake Line Kit - Triple Axle - 15' Long, 1/4" Main Line
- Video: Review of Hydrastar Trailer Brakes - HS496-153
- Shop: Kodiak Hydraulic Brake Line Kit - Triple Axle - 20'
- Shop: Dexter Hydraulic Brake Lines and Fittings for Tandem-Axle, Torsion-Axle Trailers
- Video: Bleeding Brakes Demonstration
- Shop: Kodiak 12" Rotor - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs
- Search Results: rotor hub 12 dac
- Search Results: disc brakes
- Q&A: How Often Should Trailer Tires be Replaced
- Shop: Hydrastar Hydraulic Brake Line Kit - Tandem Axle - 25' Long, 3/16" Main Line
- Video: Review of Hydrastar Trailer Brakes - HS496-252
- Video: HydraStar Hydraulic Brake Line Kit Review
- Q&A: Triple Axle Disc Brake Line Kit for 29 Foot Long Boat Trailer
- Search Results: e z loader oil bath hubs
- Search Results: boat trailer brake line kit
- Shop: Hydrastar Electric Over Hydraulic Actuator for Drum Brakes - 1,200 psi
- Shop: Hydrastar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi
- Search Results: brake controller troubleshooting
- Search Results: electric~hydraulic brake actuator
- Search Results: hydraulic brake lines
- Video: Review of Bright Way Trailer Breakaway Kit - Kit with Charger - 3802311
- Video: Hydrastar Brake Actuator HS85-1020 Review
- Q&A: How to Bleed Electric Over Hydraulic Trailer Brakes
- Q&A: Are Dacromet and Stainless Brake Finishes Good for Boat Trailers
- Q&A: Should a Boat Trailer Have Hydraulic Brakes on Both the Front and Rear Axle
- Q&A: Recommended Brake Line and Hose Routing Method for Trailers
- Q&A: Fit of Kodiak 20TA-BLKIT Brake Line Kit with Hydraulic Drum Brake Assemblies
- Video: Kodiak Trailer Brakes 20TA-BLKIT Review
- Article: Adding Electric Over Hydraulic Disc Brakes
Keith D.
9/18/2019
So the last issue is the flex hoses going to the calipers. I will need hoses with a 90 bend at the caliper end. Again, your kit shows them as straight. Part #'s would be great. Prob about 18", with stainless fittings. Thank you for your patience.