Does Optronics LED Double Dome Light Work With a Dimmer

Question

Question:

Does this light have dimmable leds, I want to use it with a wireless remote, If not do you have one that is?

asked by: Joey

1

Helpful Expert Reply:

Yes, the Optronics LED RV Interior Double Dome Light # RVILL34 will work with a dimmer. We have asked the manufacturer, Optronics, about this exact issue before and they have confirmed for us that this light is able to be dimmed so it'll be great for your needs.

I have added a link to a video review for you of this light to check out as well.

expert reply by: Kyle S

1

Answer 1

I have an option that will work as a replacement, but we do not have a bulb that has the exact amount of LEDs as the bulb in your picture. We do have the 906/921/194 LED Light Bulb in Warm White #DI76VR, Cool White #DI86VR, or Daylight White…

view full answer...

Answer 2

Reverse lockout solenoids do not draw very much amperage at all so the #20036 attached to your reverse light circuit wouldn't be a problem.

view full answer...

Answer 3

For the Pollak HD, 7-Pole Round Pin Connector w/Cable Guard #PK11702 to be compatible with your vehicle, you will need the Pollak Trailer Connector Adapter - 7-Blade Plug to 7-Pole Round Pin - Nylon #PK12727 to be compatible with the Pollak…

view full answer...

Answer 4

The factory-installed integrated brake controllers supplied in Ford trucks like your F-150 are sometimes not compatible with anything other than electric trailer brakes. If your F-150 is a 2009 or 2010 model year its integrated controller will not…

view full answer...

Answer 5

The correct Bearing Kit for your Dexter 3,500 lb torsion axles is for the #84 spindle. This can be found on our site as part #BK2-100. It comes with the Outer Bearing #L44649, Inner Bearing #L68149, and Grease Seal #58846, as well as the appropriate…

view full answer...

Answer 6

For a cover designed to fit over standard 4-way connectors we have the #C58200. Another very helpful idea will be to put dielectic grease on the pins of your 4-way. This will actually be your best way to fight the corrosion. For that you would want…

view full answer...

Answer 7

In order to install a trailer hitch on your travel trailer, I recommend using the Curt Adjustable Trailer Hitch Receiver part #C13701 which has a 500 lb tongue weight capacity so you shouldn't have any issues with your 400 lb motorcycle and…

view full answer...

Answer 8

As you probably know there are two ways a 6-Way trailer connector can be wired. One uses the center pin as the 12-volt power accessory feed, the other uses the center pin for the brake output circuit. If the adapter is one way but the trailer is the…

view full answer...

Answer 9

Both the seat width and depth (front to back) on the Bestop TrailMax II Pro Driver Seat #B3946115 that you referenced is 21 inches. The overall height of the seat is 33 inches; 27 inches for the body and 6 inches coming from the head rest. I have…

view full answer...

Answer 10

The transmission coolers that we carry are meant as supplemental coolers to the factory cooler though some people do decide to bypass the factory cooler for any number of reasons. The term tow package means different things to different manufacturers…

view full answer...

Answer 11

Thank you for including a photo of your tube steps for which you need replacement step pads. The measurement of the mounting posts (12-1/2-inches apart) is helpful too. Unfortunately without knowing the manufacturer of the bars I cannot be absolutely…

view full answer...

Answer 12

The difference between modular and spoke wheels is the appearance. In different parts of the country one will be more popular than the other. That is really the only difference. For highway use I recommend radial tires. Radial tires run cooler and…

view full answer...

Does Optronics LED Double Dome Light Work With a Dimmer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching