How to Determine if Ventline Trailer Vent Will Fit 2017 Wolf Pup 17RP

Question

Question:

Will this fit my 2017 Wolf Pup Toy hauler 17RP?

asked by: Jeanine B

0

Expert Reply:

It is likely the Ventline Ventadome Trailer Roof Vent # V2092SP-25 will fit your 2017 Wolf Pup 17RP but you do need to take some measurements to find out because vents are universal parts and are not designed to fit any specific trailer.

That said, this vent fits what is a standard 14-1/4" wide x 14-1/4" long opening in trailer roofs so if you measure your opening and get that, then this vent will fit so long as your roof is between 1-7/8" and 3" thick. You can still install this vent if you have a different roof thickness, you will just need a different garnish, # VA0445-27 for 2-7/8" to 4" thick roofs, # VA0445-28 for 3-7/8" to 5" thick roofs or # VA0445-29 for 4-7/8" to 6" thick roofs. Additionally, you will need the Roof Vent Installation Kit # 344270KITW to install the vent. This kit includes the necessary sealant, butyl tape, and screws for vent installation.

I have added links to video reviews of the vent and installation kit for you to check out as well.

expert reply by: Kyle S

0

Answer 1

RV roof vents are typically all 14" x 14" and require a 14-1/4" x 14-1/4" hole to install. Manufacturers have started prepping enclosed trailers with frame work to support a vent installation but I can't confirm whether or not…

view full answer...

Answer 2

Both the Ventline Ventadome Roof Vents you mentioned in your question, the White #V2092SP-25 and the Smoke #V2119-603-00 have translucent covers, which will allow for some light to shine through into your RV. The smoke color Roof Vent will act more…

view full answer...

Answer 3

We have several Ventline roof vent garnishes that could work for you. The part #VA0445-34 is 2-1/8 inches deep, the part #VA0445-37 is 5-1/8 inches deep, and part #VA0445-27 is 3-1/8 inches deep.

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 7

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 8

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 9

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 10

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…

view full answer...

How to Determine if Ventline Trailer Vent Will Fit 2017 Wolf Pup 17RP

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching