Best Trailer and Attachments To Carry Two Kayaks and Two SUPs  

Hey Jeffrey, The instructions for the Rhino-Rack Universal Load Assist #RR-RUSL do not include mounting to the Yakima JetStream crossbars. I checked with Rhino-Rack and they do not have those crossbars as compatible with this load assist so I…

Hey Nathan, Adarac Pro Series crossbars are 1-1/2" wide x 1-1/2" tall and the Rhino-Rack Nautic Stack Kayak Roof Rack w/ Tie-Downs #RRS520 fits crossbars 3" wide x 1-1/2" tall so they would be a compatible fit.…

Hi there Bob; you can definitely back into the water to launch your dinghy using the CE Smith Multi Sport Plus Boat and Kayak Trailer #CE48870. The hubs have a dust cap but aren't sealed so water can still get in them. To ensure no water gets…

If you want to raise the flat end of a slipper spring like #e36SR you will need to use a shorter hanger. I have attached a link to all of our hangers below for your reference. You can filter it down by spring width and height to find what…

For a 15 foot boat the best trailer option is the CE Smith Multi Sport Plus Boat #CE48870 which is the best for your size boat due to the bunk length, is galvanized like you are wanting and could easily be loaded and unloaded like you are wanting.…

The big difference between the two trailers is the EcoLight trailers like part #MAL43FR were made to be lighter weight for smaller vehicles and have lower weight capacities. This weighs 145 lbs and has a 400 lb capacity whereas the MicroSport…

You'll need to adjust the bunks on the Malone LowBed MicroSport Trailer #MAL25FR some to account for the shape of the pontoons but yes, this trailer will have no issues working with your Blue Sky Boatworks 360 Pro fishing kayak!

The Malone MicroSport Trailer part #MPG460G comes with all of the necessary related documents that will be needed to register the trailer. Once you obtain these documents you will want to take them with you to your local department of motor vehicles…

The retractable tongue kit part #MPG494 that you referenced works perfectly fine with the Malone Microsport Lowbed part #MAL25FR that you also referenced.