Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Heavy-duty trailer is perfect for hauling canoes, kayaks, and SUPs. 78" crossbars offer plenty of space to carry cargo boxes and other accessories. 13' Long marine-grade trailer with 12" wheels supports boats up to 20' long.
Features:
Specs:
Coupler Specs:
Tire and Wheel Specs:
Note: Your local municipality requires you to register your trailer with the DMV. An etrailer representative will be reaching out to get information from you for the title.
This heavy-duty trailer with 78" crossbars has extensive space to mount accessories like watersport carriers, bike racks, a fishing rod carrier, or a cargo box (sold separately). With a 7-1/2' long tongue, this trailer offers exceptional clearance during tight turns. The extended tongue also makes it easier to back up the trailer and prevent binding than trailers with shorter tongues.
The DOT-approved tail lights on this trailer are fully submersible, so you don't have to worry about damaging the lights when loading and unloading your boat in water. Each tail light has brake, running light, and turn signal functions, as well as side marker lights and reflectors. In addition, these LED lights last longer, burn brighter, and require less power than incandescent bulbs.
The wiring for this trailer has a simple plug-and-play design, so it doesn't require any cutting or splicing to install. As you assemble the trailer, route the main wiring harness through the trailer tongue and down towards the body of the trailer. Then plug the 4-wire end of the tail light harness into the main harness.
Run the wires of the tail light harness along the sides of the trailer frame and plug the individual wires into the matching wires on the side marker lights and the tail lights. The wires are color-coded so that you can easily match them up - no circuit tester is required. Once all of the wires are plugged in, use the included clips to secure the harness to the frame.
When you're ready to connect the trailer to your vehicle, simply plug the trailer end of the main harness into the 4-way flat connector on your vehicle.
This trailer includes a leaf spring suspension system to limit road shock while you tow. A sturdy steel axle runs beneath the trailer frame. The 2 slipper springs that support the axle flex to absorb the rough motion that can occur when driving over bumpy terrain. Also, the axle, spring hangers, and tie plate are galvanized to resist rust and corrosion.
Hooking this trailer to your vehicle is quick and easy. The trailer's coupler connects to a 2" hitch ball, and the included safety chains act as an emergency measure if the coupler accidentally disconnects from your hitch ball. A rubber coated lift handle is mounted to the coupler to provide a solid grip for lifting or maneuvering the trailer. Finally, the skid plate on the underside of the trailer tongue keeps the coupler from touching the ground.
Average Customer Rating: 4.8 out of 5 stars (79 Customer Reviews)
Heavy-duty trailer is perfect for hauling canoes, kayaks, and SUPs. 78" crossbars offer plenty of space to carry cargo boxes and other accessories. 13' Long marine-grade trailer with 12" wheels supports boats up to 20' long.Good quality trailer. Went together easy, had all the parts even though the main packaging was torn open from shippment. Got it licensed with no problems.
I will be hauling my 2019 Hobie Outback on this trailer. Also mounted a 6" tube for
my fishing poles. Will also be adding the storage box. Have not had it on the road
yet. I like the size of this trailer, not very heavy or to large.
The search for a trailer to carry our two Hobie Kayaks was extensive. My main concern was finding one that could carry the two heavy (83 lbs. ea.), travel at highway speeds and be easy to use. This Malone MicroSport trailer has turned out to be great. It is easy to get our kayaks on and off the trailer at the lake. Rhino-rack Nautic roof rack carriers were installed to carry the kayaks because I wanted them to provide conforming support for the hulls. They have proven to be capable of carrying the weight of the Hobie kayaks and the kayaks can be slid on them when loading/off-loading. This was a primary concern because capacity is not listed with most carriers. Assembly of the trailer was fairly easy and I would rate it requiring moderate mechanical skill. Before doing this assembly I watched a fantastic video online, walking you through the assembly.
I would add just a couple things. Those include: 1. It would be easier to do most of the assembly on a table, until you get to the wheels. Especially true for us older folks that don't bend so well. 2. Be sure to read the wiring harness installation a few times before installation. It is tricky, but will work if you follow the instructions correctly. There is barely enough wire to connect the tail lights. I wound up having to splice some wire because of problems I had. 3. You will need to get some grommets to protect the wires going through the holes in the frame. They are not supplied with the kit. Other than that the trailer works great,very solid and have had no issues traveling at highway speeds. Attached is a photo of the trailer with the kayaks.
Excellent Instructions made assembly straightforward without miss-steps. In my case, 6 hours and assembled.
Raymond L.
5/24/2021
Its great. Even better than I imagined. Perfect for my needs.
Was able to order the item when it was not in stock. Trailer was sent directly from Malone but without a proper bill of sale. Now I'm getting the run around and have a trailer that can't be registered.
I used this for the full 2021 season on at least 20 trips. I use it for quick trips to local lake withe kayak, works perfect, leave boat on trailer, drop on hitch and go. Cust load and unload times in half. The order was complete Fubar, misteaks by all UPS< Malone and etrailer. Extra parts, wrong parts. But I was able to get a real person at etrail and it was all straighened out. Including the title and paper work I needed to register in MA. Assembly takes a bit, but if you pay attention to the directions, it is straight forward. The issues I had was because I didnt pay attention, mounted srpings backward, and did discover till much later, then you have to disseble much and redo to fix. Just go slow and check each step before proceeding.
Product was as advertised, however it was missing four bolts that I had to get at a hardware store, but other than that it was fine. Service from etrailer team was outstanding.
Only thing I would suggest would be adding a video on your website about backing the trailer up from various angles. I still have problems with that.
Sierra K.
11/4/2021
I found a video on our site that will help you:
Helpful Links
Great trailer for my Hobie PA12 kayak. Pricing for this item is the same everywhere so service makes all the difference - etrailer and their rep Kathy delivered. They provided excellent communications and updates on shipping and a timely receipt of the MCO made it easy to title. Overall a professional experience. Thank you!
Fairly easy to assemble, works well transporting a sunfish and 2 kayaks. Good quality trailer overall
Great little trailer. Perfect for what I needed...something to haul my 16 1/2 foot canoe and 13' 8" kayak. Instructions were clear and there were no components missing.
Only problem is various boxes arrived over a 3 day period, assembly 3+ hours, but all parts present, trailer works well
Sliding tongue and ability to store vertically against garage wall is great and very easy to do. Use trailer to haul a pair of 14 foot sit on top kayaks; hauls them well and is easy to load and tie down the kayaks.
This was the perfect solution for me. I needed a way to transport kayaks with a vehicle that did not work with rooftop racking systems. Not to mention much easier to load/unload than a roof rack. Customer service is very nice any very helpful. All and all, a great experience!
The trailer assembly was easy. The most difficult part, if any, was centering the support bars. We just wish it was 'Made in the USA' instead of China. etrailer expediently shipped the (4 total) packages. We were pleasantly surprised how quickly we received them. FYI: The registration documents are mailed separately. We look forward to loading up our kayaks and going fishing. Cheers!
Easy to assemble with minimal tools. Grandkids Ivan and Jeanette did the work, grandpa checked mechanical integrity. Ready to go and play by the afternoon.
Excellent is an understatement. Very easy to order on line. All questions answered without hesitation. Product shipped and was received in a timely fashion. Great company
Bought the LowBed MicroSport specifically for my Blue Sky Boat Works Angler 360 kayak. Trailer works great! It's lower and makes getting the kayak on and off easier. Had no issues with the trailer assembly. LED lights work great. After one year I'm very happy I bought this trailer.
: Didn't work out at all considering with the j-hooks installed the trailer is way too deep to hug a wall, so I store the trailer outside with a tarp over it. If you have to store the trailer with the tongue retracted, this is a must have.
Nice trailer, easy to put together except it, being the low bed cane with directions for the high bed. But Etrailef send me the pdf for the low bed.
I researched a number of different trailer options for my pair of Hobie fishing kayaks. Due to their weight, proper support was crucial to prevent long term sagging. I liked the multiple options available with the Malone Microsport trailer and went with the twin bunk option.
The Microsport trailer is sturdy and easy to assemble. The instructions were detailed and easy to understand. I also took advantage of assembly video on the etrailer.com website. All this being said, I found the estimated 3 hour assembly time to be overly optimistic. (It took me about 5 hours.)
I like the fact that all of the parts are galvanized. Living in a rainy area and using the trailer to store the kayaks when not in use, rust prevention is important to me. I'm confident the trailer will last a long time.
I've already towed my kayaks over 100 miles to our vacation home without incident. The trailer towed like a dream. The LED lights are bright and easy to see from behind, even though the kayaks overhang the back of the trailer by at least 4 feet. I was not concerned about drivers behind me not being able to see my turn signals and break lights.
All in all, the Malone Microsport trailer is great, reasonably-priced trailer for kayaks and canoes. It also makes a great rack to store them on, if you have the space.
Can't say enough about the quality and prices. Ashley and Bridgette in CS were extremely helpful in helping me get what I needed in a Kayak trailer, and their follow up was extraordinary. Malone trailer is very sturdy, assembly instructions were right on. Paper work for title and registration was sent to me asap after delivery of the trailer. Trailer tows and tracks very well.
Do you have a question about this Kayak Trailer?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Keith W.
7/16/2020
Its been working out great! Diffidently was a good purchase. It handles my Hobie Outback kayak with ease. I can loadunload it easily by myself. I haul it with my Jeep wrangler. The trailer is lite enough that I can move it around myself. I did not install the storage box, because I feel that it needs support from the bottom. Im afraid with to many bumps on the road could cause it to fail. So I keep it inside the Jeep instead. Still Im glad I purchase the storage box, very handy.