Best Way to Reduce Sway and Improve Ride of 2015 Winnebago Trend Motorhome

Question

Question:

2015 Winnebago trend. I’m looking to get rid of the sway probably And improve on the towing capacity I noticed three different products do I need all three or is there one that will do the trick

asked by: Kevin

0

Expert Reply:

Improving the ride quality of your 2015 Winnebago Trend motorhome is something we can help you with, though I should note that there is no way to upgrade the towing capacity, which is set by the manufacturer. I recommend adhering to the capacity to ensure you do not put undue stress on your Winnebago's chassis, transmission and suspension components.

The best way to enhance the ride of your '15 Trend is with the Roadmaster Rear Anti-Sway Bar # RM-1129-143 because it is a vast improvement over the OEM sway bar and its placement at the rear of the vehicle ensures it will improve your Winnebago's handling and greatly reduce sway. A motorhome will sway because of how much larger and how much more weight their is at the rear, and the anti-sway bar works to continually stabilize that section, so you no longer have to white knuckle the steering wheel when you encounter crosswinds or a passing semi.

The anti-sway bar is the best thing for you, but you can further improve your ride by adding the SumoSprings Solo Custom Helper Springs # SSR-313-47 to your rear axle. The SumoSprings are made of a cushioning microcellular urethane which compresses, and the two springs works independently to help reduce body roll and keep you level.

I highly recommend adding both of these products to improve your ride as this combination will allow you to enjoy the journey to your destination, but if you are going to start with just one it should be the Anti-Sway bar, followed by the SumoSprings.

I have added links to video reviews of both the Roadmaster Rear Anti-Sway Bar # RM-1129-143 and SumoSprings Solo Custom Helper Springs # SSR-313-47 for you to check out as well.

expert reply by: Kyle S

0

Answer 1

Sumo Springs are a great solution that are easy to install and don't require any type of maintenance once they're on. I recommend using the SumoSprings Solo Custom Helper Springs #SSR-313-47 because of the springs compress easily at…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Answer 4

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 5

What you need for your Isuzu NPR truck is a powered converter #C59236. It is compatible with incandescent and LED trailer lights. I have included a link to the installation instructions for you. This harness does require a direct connection to the…

view full answer...

Answer 6

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 7

Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller, you'll also need the #3063-P wiring harness and the #331-TPH-017. The connector to install…

view full answer...

Answer 8

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 11

Hi Joe, The Blue Ox Base Plate Kit #BX1139 is a confirmed fit for your 2024 Jeep Wrangler Rubicon X per Blue Ox. I don't currently have an installation video on a model with a steel bumper but I did measure from the mounting holes down to the…

view full answer...

Answer 12

Yes you can install the Hopkins Insight brake controller in your 2021 Ford Ranger and actually you don't need anything else to do so. Your Ranger doesn't have a connector for brake controller wiring and instead has 4 blunt cut wires that are…

view full answer...

Best Way to Reduce Sway and Improve Ride of 2015 Winnebago Trend Motorhome

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching