Roof Rack Recommendation for 2019 Ford F-150 Crew Cab for Carrying Ladders

Question

Question:

Would this roof rack be able to hold a 30ft ladder safely on a Ford F-150 crew cab ?

asked by: Adrian H

0

Expert Reply:

The SeaSucker roof rack part # 298-SX6000B that you referenced has a weight capacity of 150 lbs and has a pull strength per vacuum cup of 210 lbs. Which this rack has a total of 6 cups so it would easily be rated to carry a 30 foot ladder.

I'd rather recommend you the Rhino Rack Heavy Duty roof rack that is a confirmed fit for your 2019 Ford F-150 crew cab that consists of # RB1500B-2, # RRRLKHD, and # DK427. This heavy duty style bar is better suited for carrying ladders as it's a larger square bar with a rubber anti-slip strip on top of it and can have load stops easily installed on like the # RRRLH which would be ideal for carrying a ladder rack. Plus I prefer roof racks that grab onto the vehicle using clips and not vacuum cups. Even if the vacuum cups are rated for it. I attached an install video link to this page that shows this rack installed on a similar F-150 as yours as well.

For cinch straps the cam buckle cinch straps part # RTD3 would be all you'd need and you'd be ready to go!

expert reply by: Jameson C

0

Answer 1

We don't always list fit information for track kits because of the varying applications of them on trailers, camper shells and actual vehicles. This is because of the numerous variations of these vehicles and the fits that would need to be listed…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 4

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 5

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 6

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 7

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 8

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 9

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 10

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 11

To replace your WFCO WF-8750P power center I recommend the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K. This 2-in-1 AC/DC distribution panel and converter charger keeps your power systems easily…

view full answer...

Answer 12

You'd need a new panel like the Progressive Dynamics Mighty Mini part #PD4045KA which is the most similar to your Parallax 7345 except is Lithium battery compatible. There isn't a center section replacement available for what you have that…

view full answer...

Roof Rack Recommendation for 2019 Ford F-150 Crew Cab for Carrying Ladders

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching