How Much Torque Is Applied to the Curt Class III Ball Mount with 2 Inch Ball

Question

Question:

How much is the torque on the nut holding the ball mount?

asked by: Jan

0

Expert Reply:

The Curt Class III Ball Mount with 2" Ball part # C45056 comes pre-torqued to 250 ft. lbs.

expert reply by: Conner L

0

Answer 1

The etrailer.com Trailer Hitch Receiver part #E98841 when we installed it on a 2013 Hyundai Santa Fe was 13" from the ground to the top inside edge of the receiver tube. I called U-Haul and they said that the coupler height of the 4x8 cargo…

view full answer...

Answer 2

I checked the reviews on the Curt Trailer Hitch Receiver #C13397 product page and we have had a number of customers install the hitch on the 2023 and 2024 CR-V Hybrid (including the Sport), and it does fit. We also installed the #C13397 on a hybrid…

view full answer...

Answer 3

You can have a 2-5/16 inch hitch ball on either a 1 inch or 1-1/4 inch shank. The nut on a hitch ball with a 1-1/4 inch shank takes a wrench with a 1-7/8 inch socket. A hitch ball with a 1 inch shank will take a wrench with a 1-1/2 inch socket. You…

view full answer...

Answer 4

Adding the Air Lift 1000 Air Helper Springs #AL98WQ to the rear suspension on your 2024 Honda CR-V will allow you to control the rear end sag. The air springs allow you to add air into the bags which presses into the gaps between the springs pushing…

view full answer...

Answer 5

It is going well and I'd be happy to help you! For a 2024 Honda CR-V Hybrid Sport, I recommend the etrailer Hitch item #e98848 you were looking at. We have confirmed through our vendor and customer reviews that this hitch will fit the hybrid…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The etrailer hitch #e98848 will fit your 2021 Honda CRV Hybrid EXL. When the description for the etrailer hitch says both "excluding hybrid and touring" and "hybrid," the description is saying it will fit both 2021 Honda CR-Vs…

view full answer...

Answer 8

The Trailway sold in the big box stores is the same thing as the Hitching Post Pro, #TH934XTR, both of which are similar to the Parkway. The straps are all the same too. But the Trailway and Hitching Post are more related to each other since they are…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 12

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

How Much Torque Is Applied to the Curt Class III Ball Mount with 2 Inch Ball

Product Page this Question was Asked From

Continue Researching