Replacement Plastic Fender with Steps for Thule Trailer

Question

Question:

I have a 2007 Thule trailer, probably made by Mission or Alcom?. It is a 5x8 aluminum with a step type fender. The fender is 7 1/2 in wide, bolt pattern inside fender is vertical and is 22 1/2 apart and the overall length is 33 1/2. I want to order best match possible and prefer gray but other colors ok. Thanks for your time

asked by: Larry H

0

Expert Reply:

Thank you for the photo of your trailer fender. The replacement fender closest to yours is Fulton part # F008592 which is a silver/gray color and that has overall dimensions of 33-1/2 long x 7-1/2 wide x 8-3/4-inches tall. You can see this in detail by clicking on the linked video.

This fender is sized to work with 12-inch diameter trailer wheels and it is a bracket-mount type that is NOT pre-drilled with mounting holes. You will drill the necessary holes.

The linked page displays all of our fender mounting brackets such as # CE26061G-2. If your existing fender brackets are still intact you can re-use them and drill the fender accordingly.

expert reply by: Adam R

0

click to enlarge

Answer 1

I can help you determine if the Fulton fenders you asked about fit your trailer, but fenders are universal parts and there is simply no way to know what fits any specific year, make and model of trailer (this is actually true for all trailer parts…

view full answer...

Answer 2

Below is the general process for bleeding an electric over hydraulic brake actuator like #K71-650. Fill reservoir with NEW brake fluid. Never re-use brake fluid that has been salvaged or removed from another system. Remove the key from the breakaway…

view full answer...

Answer 3

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 4

We have just what you are looking for. I called my contact at TDE and asked about the hub you have on your boat trailer. They told me that it was a 5-stud idler hub for a 3,500-lb axle. That means you need the part #AKIHUB-545-35-K. This is a fit for…

view full answer...

Answer 5

The Adco SFS AquaShed Truck Camper Cover part #290-12264 is what I recommend for your Lance Truck Bed Camper Model 1010. The Adco SFS AquaShed is durable, has zippered panels for access inside, and has weighted buckles to help with installation. The…

view full answer...

Answer 6

The Demco Channel Only Trailer Actuator, part #DM8202022, was designed to be used with drum brake applications only. You could use this actuator with disc brakes, but you would have to replace the master cylinder in the actuator with the Demco disc…

view full answer...

Answer 7

The Dexter 8-427 hub is no longer available. Even looking through Dexter's site the only references to it are replacement bearings. You can use a wheel with a larger pilot hole as long as the wheel attaches to the hub using lug nuts and not…

view full answer...

Answer 8

The tires on your trailer should not come off the ground while leveling. It sounds like you just need to reset the zero point. In order to do this you will need to follow the steps I have attached for you below and in the photo. If this does not fix…

view full answer...

Replacement Plastic Fender with Steps for Thule Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching