Trailer Hitch For 2019 Kia Sorento

Question

Question:

I bought this hitch as it said its compatible with Sorento. Mine is a 2019 so does that mean the 13152 is not compatible? Theres an exhaust support right in the way of the hitch so I can get the holes to line up! Would appreciate your thoughts. This thing is crazy heavy and Im going crazy too...

asked by: Ralph H

0

Expert Reply:

The Curt Trailer hitch part # C13152 fits Kia Sorentos between 2014 - 2015. The Curt Trailer hitch that fits the 2019 Kia Sorento Is part # C13195. I have attached an installation video for your reference. There was a design change in 2015 to the Kia Sorentos so hitches that fit the first or second generation will not fit properly.

expert reply by: Heather A

0

Answer 1

The Curt Trailer Hitch Receiver part #C13195 is a confirmed fit for a 2019 Kia Sorento SX.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

If your 2020 Kia Sorento has the factory tow package, there will be a tail light wiring connector behind the rear tire of the driver side, on the outside of the frame rail. As shown in the attached photos, an underbody cover will need to be removed…

view full answer...

Answer 5

That is an excellent question and is asked more often than you think. Electric brakes like what come in the Electric Trailer Brake Kit #AKEBRK-2 can be submerged in water when you are loading/unloading your boat. Since water and electricity don't…

view full answer...

Answer 6

I'm assuming your Express doesn't have the 7-way, but does have the capped round plug behind the bumper on the drivers side frame rail, you'll install part #30955. Simply remove the cap and plug the connector in. To wire up the controller…

view full answer...

Answer 7

Since the discontinued MaxxAir 4700k model fits a standard 14 x 14 RV vent opening, I recommend the MaxxFan Plus Roof Vent w/ 12V Fan - 10 Speed #MA00-04500K. The MaxxFan Plus comes with a thermostat and a remote for easy temperature customization.…

view full answer...

Answer 8

There is a panel just under and behind your driver's side wheel well that you can remove to determine if you have the tow package or not. If you check out the attached picture you can see what wiring will be in this location for the tow package…

view full answer...

Answer 9

To determine if your 2020 Kia Sorento has a towing package you'll need to remove the sidewall panel just behind the rear driver's side wheel well. Inside you'll find a wiring harness connector that will allow you to plug in a tow package…

view full answer...

Answer 10

If your 2019 Kia Sorento has the factory tow package then I recommend starting with the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector #C56332 which will connect to the wiring harness located along the…

view full answer...

Answer 11

Absolutely, you can check just behind the rear tire on the driver's side of your 2019 Kia Sorento, on the outside of the frame rail. The factory connector, if present, will look like the one in the attached photo (B). Note that you will need to…

view full answer...

Trailer Hitch For 2019 Kia Sorento

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching