Weight Distribution Shank for 2-1/2-Inch Hitch That Allows Increased Height Drop
Question:
I need a 2/ 1/2 x 2 1/2 shank with more to work with my 2019 Ford F-250 4x4. The top of the hitch receiver is 23 1/2 inch and the height of the trailer hitch is 19 1/2inch at the flange on the bottom of the ball coupler. Im using a EAZ-Lift 1500 lb. weight distributing ball mount with a 2 5/16inch ball. Im hoping I can use the EQ90-02-4900 shank but I dont know if will be low enough? Thanks,
asked by: Dale S
Expert Reply:
Since weight distribution shanks are made to a common standard you can use any brand of 2-1/2-inch shank with your EAZ-Lift setup.
Based on your dimensions you need a shank that will give you at least 4-inches of drop. The Equal-i-zer shank # EQ90-02-4900 that you referenced should work great since it gives up to 6-inches of drop (and so long as your actual tongue weight (TW) does not exceed its 1600-lb rating). Please refer to the linked photo of this part that has measurements.
If you want a shank with even more drop range Curt offers part # C17132 which allows for drop up to 9-1/4-inches.
Products Referenced in This Question
Curt Weight Distribution Shank for 2.5" Hitches - 9-1/4" or 10" Drop - 13" Rise
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- 15000 lbs GTW
- Fits 2-1/2 Inch Hitch
- Round - 10 Inch Drop
- Trunnion - 9 Inch Drop
- Round - 13 Inch Rise
- Trunnion - 13 Inch Rise
- CURT
more information >
Product Page this Question was Asked From
Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 10" Rise/6" Drop
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1200 lbs TW
- 12000 lbs GTW
- Fits 2-1/2 Inch Hitch
- Equal-i-zer
- Square - 6 Inch Drop
- Square - 10 Inch Rise
- Equal-i-zer
more information >
Continue Researching
- Q&A: Weight Distribution Recommendation for a 2024 Jayco Flight 284BHS
- Article: How to Measure for Trailer Hitch Drop
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: RV Propane Troubleshooting | Common Propane Issues and How to Solve Them
- Q&A: Does Hitch Ball Angle Need Adjusting For Equal-i-zer Weight Distribution
- Q&A: Weight Distribution Adjustments For Hauling A 2020 ATC Toy Hauler
- Q&A: Does Fresh Water Tank Need to be Full When Adjusting Equal-i-zer 16k Weight Distribution Hitch
- Q&A: Shank Recommendation for Fastway Weight Distribution for 2019 Ram 2500 with 2.5 inch Hitch
- Q&A: Recommended Sliding Ladder Rack for a 2024 GMC Sierra 2500 w/ a 8 Foot Bed
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Does the Hitch Ball Come Installed on the Equal-i-zer Weight Distribution EQ37101ET?
- Article: Anti-Rattle Devices
- Article: 2023 Best Gifts for RVers & Campers
- Article: Top Weight Distribution Hitches for a Buttery Smooth Ride