Replacement Foot for etrailer 3,500 Electric Jack Part # EJ-3520-BBX

Question

Question:

Where can I buy bottom plug?

asked by: Cerda

0

Expert Reply:

We have a number of replacement parts for the Electric Jack w/ Footplate part # EJ-3520-BBX. I am not totally sure what you are referring to as the bottom plug but if it is the footplate, we have this available using the Replacement Foot for etrailer or Ram Electric Jacks part # EJ-3520-FT.

If this is not what you are referring to them please just let me know or send a photo pointing out what you need replaced.

expert reply by: Conner L

0

Answer 1

The Replacement Foot for etrailer or Ram Electric Jacks #EJ-3520-FT has an inner diameter of about 1-1/2" and its outer diameter is 1-3/4" which is the measurement you'll need if you are looking for a replacement. This foot is designed…

view full answer...

Answer 2

I pulled up pictures of your 2012 Travel Lite Idea 15q and the Lippert Jack-It bike rack part #LC429756 would fit and work great.

view full answer...

Answer 3

The outer diameter of this tube is 1-3/4 inches, if that matches the diameter of your old foot, this should work well for you. A snapper pin like #2500-26 is typically used to hold the foot in place.

view full answer...

Answer 4

You can replace the leg on the Buyers Products 12v Electric Jack #3370093500 with the Replacement Footpad for Buyers Products 12v Electric Jacks #3373013261 .

view full answer...

Answer 5

I do have a solution for you, however the Replacement Foot Pad #2500-3755G referenced in your question is designed specifically for certain electric jacks made by Stromberg Carlson so I cannot confirm if it will work well for your existing jack. For…

view full answer...

Answer 6

The footplate/drop-leg is indeed removeable on the etrailer.com Electric Jack w/ Footplate - A-Frame - 25-1/2" Lift - 3.5K - Black #e49ZR. Said footplate ( #EJ-3520-FT ) is held in place with a snapper style pin ( #JFC-PN ), both of which are…

view full answer...

Answer 7

Sounds like you have an issue with the nut and screw of the inner leg on your trailer jack. Typically this is a sign that it's time to replace the jack as it has an internal problem. I recommend replacing it with the Stromberg Carlson Electric…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

The length of wire desired depends on your vehicle connection and your personal preference. You want enough slack for turning, but not so much for dragging as you mentioned. A little extra slack isn't a problem and not enough could lead to stress…

view full answer...

Answer 10

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 11

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 12

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Replacement Foot for etrailer 3,500 Electric Jack Part # EJ-3520-BBX

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching