Height of Buyers Products A-Frame Jack # 3370091265 without Handle
Question:
I have a trailer tool box mounted near the area of the jack. I need the measurement of the jack from the mounting plate to the top of the tube. Please do not include the height of the handle. The handle needs to be above the tool box in order to properly function the jack. My old broken jack had 12 3/4inch which is the minimum measurement i can accept.
asked by: Drew H
Expert Reply:
I went out to our warehouse to take a look at the Buyers Products A-Frame Jack # 3370091265 referenced in your question. I measured a height from the mounting bracket up to the top of the tube (before the handle) of just about 9-1/2 inches. I have attached an image to assist.
To get the clearance measurement you're needing you likely will need to move down to a 2,000 pound topwind jack (if possible for your trailer's tongue weight). For this I recommend taking a look at the Pro Series # PS1401000303 that features a height of 16 inches from the bracket to the top of the jack (before the handle). This jack has 15 inches of lift and can be paired with the Detachable Footplate # PS1400700340.
I have included a short video demonstration that you can check out as well.
Products Referenced in This Question
Pro Series Detachable Footplate w/ Pin for 2" Diameter Jacks - 2,000 lbs to 5,000 lbs
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Jack Foot
- 2 Inch Diameter Tubing
- Pro Series
more information >
Pro Series Round, A-Frame Jack - Topwind - 15" Lift - 2,000 lbs
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Topwind Jack
- 15 Inch Lift
- Bolt-On
- Weld-On
- No Wheel or Foot
- Pro Series
more information >
Product Page this Question was Asked From
Buyers Products A-Frame Jack w/ Support Foot - 15" Travel - 5,000 lbs
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- A-Frame Jack
- Leveling Jacks
- Tongue Jacks
- Steel
- 4001 - 5000 lbs
- Topwind Jack
- 15 Inch Lift
- Bolt-On
- With Rectangle Foot
- Buyers Products
more information >
Continue Researching
- Shop: Buyers Products A-Frame Jack w/ Support Foot - 15" Travel - 5,000 lbs
- Shop: Round A-Frame Trailer Jack - Topwind - 14-1/4" Lift - 2,000 lbs
- Shop: Round A-Frame Trailer Jack - Topwind - 15" Travel - 3,000 lbs
- Shop: A-Frame Trailer Jack - Topwind - 5,000 lbs. by Dutton-Lainson
- Video: Erickson Ratchet Tie Down Straps with Web Clamps Review
- Q&A: Mounting Bolt Hole Pattern for the Buyers Products A-Frame Jack # 3370091265
- Q&A: Various Dimensions of Dutton-Lainson A-Frame Trailer Jack, # DL22772
- Q&A: Replacing Halogen Flood Lights On a Haulmark Enclosed Trailer for LED Units
- Shop: Ram Round A-Frame Trailer Jack - Topwind - 14-7/8" Travel - Zinc - 3,000 lbs
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Shop: Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel - 5,000 lbs
- Shop: Bulldog Round, A-Frame Jack - Topwind - 15" Lift - 2,000 lbs
- Video: Bulldog Trailer Jack - A-Frame Jack - BD1750290317 Review
- Shop: RV Exterior Lighting
- Shop: RV Interior Lighting
- Video: Optronics LED Rectangular Interior/Exterior Light Installation
- Q&A: How to Wire a Trailer Break Away System and Connect Auxillary Battery and Brake Wires
- Q&A: Distance from Mounting Bracket to Bottom of Buyers Products Jack 3370091265
- Q&A: Does Break-Away Battery for a Haulmark Car Trailer Comes Fully Charged
- Search Results: trailer jack
- Search Results: trailer jack cover
- Shop: Trailer Hitch
- Video: Buyers Products Trailer Jack - A-Frame Jack - 3370091265 Review
- Video: Buyers Products A-Frame Jack with Support Foot Installation
- Video: Bulldog Round A-Frame Jack Review BD1750290317
- Q&A: USA Made A-Frame Jack that is Topwind and has Foot Plate
- Search Results: battery
- Search Results: wire connectors
- Search Results: marker lights
- Search Results: reflector adhesive