BOLT Hitch Receiver Lock for 2019 Toyota Tundra

Question

Question:

I traded my 2018 tundra for a 2019. I need a new receiver lock for the new truck. What bolt lock will work.

asked by: Linda

0

Expert Reply:

In your 2019 Toyota Tundra you can use BOLT hitch lock # BL7023584. This 5/8-inch diameter pin lock will fit both 2-inch and the 2-1/2-inch hitches and it will code to your ignition key the first time you insert and turn it.

expert reply by: Adam R

0

Answer 1

I am sorry to hear about the issues you are having with the Trailer Hitch Receiver Lock part #e98880. The main way you are going to be able to preserve it is to make sure you keep the dust cover, Replacement Dust Cover for Deadbolt Hitch Lock part…

view full answer...

Answer 2

Toyota and some Ford and Chevy OEM trailer hitches have that extra piece on the outside of the hitch and they require a different, longer locking hitch pin. Since we found out about this a few years ago we have added the note on the #e98880 product…

view full answer...

Answer 3

The OEM receivers on the newer Tacoma and Tundra models are wider than what's usually seen, so a longer lock is needed (as you seem to already know). We came up with a lock that has a inside span of 3-5/8 inches which works perfectly with those…

view full answer...

Answer 4

For just a standard hitch pin designed for the 2 inch hitch of your 2001 Toyota Tundra we have the part #PC3. Or if you wanted a hitch pin that has a lock built in to it you'd want the part #e98882.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 10

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 11

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 12

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

BOLT Hitch Receiver Lock for 2019 Toyota Tundra

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching