Hitch Pin Recommendation for 2001 Toyota Tundra with 2 inch Hitch

Question

Question:

I have a 2001 Toyota Tundra SR5 with the TRD package...it is a V8 engine with the factory installed tow hitch. I need to buy a pin for it and there are so many choices. Can you tell me what you would recommend. thanks

asked by: Mary E

0

Expert Reply:

For just a standard hitch pin designed for the 2 inch hitch of your 2001 Toyota Tundra we have the part # PC3. Or if you wanted a hitch pin that has a lock built in to it you'd want the part # e98882.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I am sorry to hear about the issues you are having with the Trailer Hitch Receiver Lock part #e98880. The main way you are going to be able to preserve it is to make sure you keep the dust cover, Replacement Dust Cover for Deadbolt Hitch Lock part…

view full answer...

Answer 2

In your 2019 Toyota Tundra you can use BOLT hitch lock #BL7023584. This 5/8-inch diameter pin lock will fit both 2-inch and the 2-1/2-inch hitches and it will code to your ignition key the first time you insert and turn it.

view full answer...

Answer 3

Toyota and some Ford and Chevy OEM trailer hitches have that extra piece on the outside of the hitch and they require a different, longer locking hitch pin. Since we found out about this a few years ago we have added the note on the #e98880 product…

view full answer...

Answer 4

The OEM receivers on the newer Tacoma and Tundra models are wider than what's usually seen, so a longer lock is needed (as you seem to already know). We came up with a lock that has a inside span of 3-5/8 inches which works perfectly with those…

view full answer...

Answer 5

The Curt Pin and Clip #F-4 that you referenced is designed to work on 1-1/4 inch hitches. The reason your hitch has a 1/2 inch hole and a 5/8 inch hole is because it is setup for an obsolete anti-rattle device Draw Tite J-Pin. We no longer carry the…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Hitch Pin Recommendation for 2001 Toyota Tundra with 2 inch Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching