Will EcoHitch Hidden Trailer Hitch Receiver # 306-X7284 Fit 2014 VW Jetta SportWagen TDI

Question

Question:

Just want to verify: this model will fit a 2014 TDI Jetta Wagon Listing is confusing

asked by: Kevin L

1

Helpful Expert Reply:

Yes, the EcoHitch Hidden Trailer Hitch Receiver # 306-X7284 referenced in your question is confirmed to fit your 2014 VW Jetta SportWagen TDI. This particular hitch actually fits both the TDI and non-TDI models.

This is a really nice hitch that features a hidden design so that only the receiver is visible at the rear. This is also the only 2 inch hitch receiver available for your vehicle, which will open the door to a lot more compatible hitch-mounted accessories like bike racks or cargo carriers.

expert reply by: Chris R

1

Answer 1

We do in fact have several folding kayak carriers that will fit your Thule Wingbar Evo Crossbars on your 2013 Volvo XC90. I recommend looking into the Malone DownLoader Kayak Carrier with Tie-Downs - J-Style - Folding - Side Loading #MPG114MD. This…

view full answer...

Answer 2

Hey Chuck, the EcoHitch Hidden Trailer Hitch #306-X7284 itself weighs 35.656 lbs.

view full answer...

Answer 3

The EcoHitch #306-X7284 is confirmed to fit your 2014 Volkswagen Jetta SportWagen TDI.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 7

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 10

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 11

The squeaking noise on your trailer is probably coming from the joints in the suspension creating metal to metal friction. So, unless your original Equa-Flex Cusioned Equalizers are damaged or corroded, what will make the biggest difference is to…

view full answer...

Answer 12

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Will EcoHitch Hidden Trailer Hitch Receiver # 306-X7284 Fit 2014 VW Jetta SportWagen TDI

Product Page this Question was Asked From

Continue Researching