Weight Distribution Shank with 8 inch Drop for Equalizer System
Question:
Do you have an equalizer hitch shank that has another 2 inches of drop than this one? Has to be 2 1/2 inch receiver. # EQ90-02-4900.
asked by: Ralph H
Expert Reply:
We do carry a Curt weight distribution shank that offers 2 more inches of drop than the Equal-i-zer shank part # EQ90-02-4900 that offers a 6 inch drop. The Curt weight distribution shank for 2 1/2 inch hitches part # C17132 has a 9-1/4 inch drop and will fit into the weight distribution head that came with the Equal-i-zer system. The Curt weight distribution shank has the same hole spacing as the Equal-i-zer shank so they are interchangeable. The majority of weight distribution shanks have similar hole spacing so they are basically universal.
Products Referenced in This Question
Curt Weight Distribution Shank for 2.5" Hitches - 9-1/4" or 10" Drop - 13" Rise
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- 15000 lbs GTW
- Fits 2-1/2 Inch Hitch
- Round - 10 Inch Drop
- Trunnion - 9 Inch Drop
- Round - 13 Inch Rise
- Trunnion - 13 Inch Rise
- CURT
more information >
Product Page this Question was Asked From
Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 10" Rise/6" Drop
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1200 lbs TW
- 12000 lbs GTW
- Fits 2-1/2 Inch Hitch
- Equal-i-zer
- Square - 6 Inch Drop
- Square - 10 Inch Rise
- Equal-i-zer
more information >
Continue Researching
- Shop: Trailer Hitch
- Shop: Brake Controller
- Shop: Curt Echo Under-Dash Bluetooth Brake Controller w/ OneControl App - 1 to 4 Axles - Proportional
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Weight Distribution System Recommendation for 500 lbs Tongue Weight
- Shop: Strait-Line Weight Distribution System w/ Sway Control - Trunnion Bar - 8,000 lbs GTW, 800 lbs TW
- Shop: Trailer Wiring
- Q&A: Parts Needed to Install 7-Way and 4-Way Trailer Wiring in 2022 Hyundai Palisade
- Q&A: Wiring Harness For a 2022 Kia Telluride That Does Not Have Factory Tow Package
- Shop: Curt Trailer Connector Adapter with Backup Alarm - 4-Way to 7-Way RV and 4-Way Flat
- Shop: Replacement Custom Multi-Tow 7-Way and 4-Way Trailer Connectors
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Suspension Enhancement
- Shop: Air Lift 1000 Air Helper Springs for Coil Springs - Rear
- Q&A: Brake Controller Recommendation/Install 2021 Kia Telluride with Factory 7-Way/Tow Package
- Q&A: Best Way to Prevent Sagging Suspension When Towing a Trailer
- Search Results: 44649
- Video: Choosing the Right Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: 68149
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: Choosing the Right Brake Controller
- Article: Trailer Wiring Diagrams
- Search Results: dust cap
- Shop: Fifth Wheel Hitch
- Article: Brake Controller Installation: Starting from Scratch
- Video: Tow Ready 4-Pole Mounting Bracket Installation