10 Inch Electric Brake Assemblies for 3,500 lb Axle
Question:
Will these brakes work for a 3500# dexter axle s/n 122945338 ca13010080? Does it include all hardware necessary for installation, or are other parts needed.
asked by: Dave H
Helpful Expert Reply:
The size of your hub and drum is the important factor, though axles with weight ratings of 3,500 lbs should have a 10" diameter drum so the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469 should fit great. The only other thing you need to confirm is that you have a 4-bolt brake mounting flange with a bolt hole distance of 2-7/8" apart on center such as # 4-35, which is also common on 3,500 lb axles.
The Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469 does come with the necessary mounting hardware. I have added links to a video review and video install for you to check out as well.
Products Referenced in This Question
Brake Mounting Flange for 2-3/8" Round Axle
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 10 Inch
- 2-3/8 Inch Diameter Axle
- Redline
more information >
Product Page this Question was Asked From
Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Q&A: Comparing Dexter and etrailer Electric Brakes for 3,500 Lb Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Article: Most Popular Wheel Bearings
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Search Results: 25580
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 68149
- Shop: Brake Controller
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Search Results: dust cap
- Q&A: 05680-C Master Cylinder Replacement for Trailer Recommendation
- Article: Trailer Tire Sizing
- Shop: Fifth Wheel Hitch
- Q&A: Location of the 40-Amp Fuse for the 2006 Chevrolet Silverado Tow Package
- Shop: Gooseneck Hitch
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: dust caps
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Replacement Clearance Lights Needed for GLO-BRITE 122R and 122Y Lights
on Trailer Brakes
