Replacement Hardware for Westin Sportsman Grille Guard on a 2011 Chevrolet Silverado 1500

Question

Question:

I need the replacement hardware for the Westin Sportsman Grille Guard. For my 2011 Silverado

asked by: Chad

0

Expert Reply:

If you have a 2011 Chevrolet Silverado 1500 then the correct replacement hardware for the Westin Sportsman Grille Guard part # 40-2275 is the Replacement Hardware for Westin Sportsman Grille Guard part # 40-227PK. If you have a 2500 or 3500 then please let me know and I will go about getting the correct replacement hardware added to our site.

expert reply by: Conner L

0

Answer 1

I passed your pictures on to my contact at Westin to see if they could identify it. Grill guards are hard to place since they're so similar from one to the next. Especially in pictures. He isn't positive but he's thinking it's either…

view full answer...

Answer 2

I spoke with my contact at Westin about the Sportsman Grille Guard, part #45-2270, mounting hardware. If there is a ridge that runds the length of the bar in the center of it, it would be the imported grille and the mounting hardware is part…

view full answer...

Answer 3

Since the Westin Sportsman grille guard part number that fits your 2013 Chevy Silverado 1500 is the part #40-2275 the correct replacement hardware kit is the part #40-227PK.

view full answer...

Answer 4

In order to install a Westin Sportsman Grille Guard part #40-2275 on a 2008 Chevrolet Silverado 1500 you will need the Replacement Hardware for Westin Sportsman Grille Guard part #40-227PK.

view full answer...

Answer 5

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 6

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 7

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 8

In regards to the Correct Track Trailer Alignment and Lift Kit part #RR23QX, the kit provides a lift by essentially extending the hangers. This normally requires cutting off the old hangers and welding on new, taller ones but with this kit you…

view full answer...

Answer 9

The Correct Track Trailer Alignment and Lift Kit - Tandem Axle #RR23QX does come with all of the components needed to lift a tandem axle trailer. The center hangers of a tandem axle setup use different components than the front and rear hangers since…

view full answer...

Answer 10

The correct replacement leaf spring bushings for any given trailer will be dependent on the width and type of the leaf springs. The most common for a Dexter 10,000 lb Trailer Axle are 3" wide slipper springs. If you have 3" wide slipper…

view full answer...

Answer 11

You can get a new brake mounting flange for your axle. The old flange will need to be cut off. The part is #4-44-1. This is designed to fit a 3 inch trailer axle and should be welded in place by a professional. Since you would also have to get the…

view full answer...

Answer 12

We do carry electric brake assemblies as well as hub/drum assemblies. To determine the correct fit, you will need to measure the spindles of your axles. I've attached a photo to assist with the measurement locations, and recommend using a digital…

view full answer...

Replacement Hardware for Westin Sportsman Grille Guard on a 2011 Chevrolet Silverado 1500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching