Do the Shackle Straps Go Inside or Outside the Leaf Spring Hanger
Question:
When mounting the rear leaf spring shackles on a single axle boat trailer, should the shackles be outside the fixed hanger or inside. I have them inside the hanger currently and they are closer together between the hangers. If I mount them on the outside the will be farther apart. I have 25 1/4 double eye springs and shackles. There is 2 inches between the hangers.
asked by: Jack
Expert Reply:
The shackle straps need to be placed on the outside of the rear leaf spring hangers which you can see in the attached photo. Furthermore, the distance between the two mounting plates (inside to inside) on your leaf spring hangers should be 1-7/8", not 2" which is most likely why there is too much of a gap between the shackle straps and leaf spring. Therefore, the leaf spring hangers will need to be replaced.
For this, we generally kit the single axle trailer suspension hangers and shackle straps together like the Single-Axle Trailer Hanger Kit for Double-Eye Springs part # APS4 or part # APS2 to make things easier so this is what I recommend using.
Products Referenced in This Question
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 1-1/4" Rear
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Single Axle
- etrailer
more information >
Product Page this Question was Asked From
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Single Axle
- etrailer
more information >
Continue Researching
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Article: Trailer Tire Sizing
- Article: Double-Eye Trailer Suspension System Review
- Video: etrailer Trailer Suspension - Leaf Spring Suspension - APS4 Review
- Shop: U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
- Shop: Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Q&A: Installing Leaf Springs on Single Axle Trailer
- Article: Where to Position the Trailer Axle?
- Shop: Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
- Shop: Trailer Axle w/ Electric Brakes - 4" Drop - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: 3-Leaf Double-Eye Spring for 2,500-lb Trailer Axles - 25-1/8" Long
- Search Results: double eye
- Shop: Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers - Double Eye Springs
- Search Results: trailer tail lights
- Article: Most Popular Wheel Bearings
- Video: etrailer Channel Tongue Trailer Coupler Review
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Search Results: shackle strap
- Video: etrailer Trailer Suspension - Leaf Spring Suspension - 28-5 Review
- Q&A: U-Bolts & U-Bolt Plate For Trailer Axle e72GR
- Search Results: spring leaf
- Search Results: fender
- Video: Review of CE Smith Trailer Leaf Spring Suspension - CE14026G
- Video: Review of CE Smith - Trailer Leaf Spring Suspension - CE14035G40
- Search Results: ce23002
- Q&A: Troubleshooting Trailer Suspension Bolts Splines that Aren't Seating
- Q&A: Bolt Hole Dimensions for CE Smith Front/Rear Hanger Bracket for Double-Eye Springs
- Video: etrailer Single Axle Trailer Fender with Backing Plate Installation
- Video: Review of etrailer Trailer Fenders - Single Axle Fender with Backing Plate - HP36VR
- Q&A: How to Mount Redline Single-Axle Trailer Hanger Kit Part # APS4 To Trailer Frame