Correct Timbren Suspension Enhancement for a 2019 Ram 3500

Question

Question:

I am a little confused as to what Timbren jounce springs I need for my 2019 Ram 3500. It isn't a cab and chassis but I am still confused as to why all of the choices?

asked by: Terence

0

Expert Reply:

The correct Timbren Rear Suspension Enhancement System (SES) for your 2019 Ram 3500 pickup should be part # TDR3500CA because the other option, part # T94VR, is for Severe Service vehicles like tow trucks.

This kit has an 8,600 lb capacity and doesn't require any drilling for the installation, but please note that it will not fit if you have the factory Air Suspension system. Another thing to remember is that this will not increase the weight capacity of your pickup as it is designed to support an OEM suspension that is in good working order.

expert reply by: Jon G

0

Answer 1

There are two different Timbren Rear Suspension Kits available for your 2019 Ram 3500. The Timbren #T94VR will provide 8,000 pounds of load leveling support and the Timbren #TDR3500CA features an even higher capacity of 8,600 pounds. Any aftermarket…

view full answer...

Answer 2

The correct Timbren Rear Suspension Enhancement System for a 2016 Ram 3500 with truck bed camper is part #TDRTT3500D as these were actually designed for this exact purpose. The other option part #TDR3500CA is just designed for standard towing…

view full answer...

Answer 3

For your 2019 Ram 3500 single rear wheel the correct fitting Timbren kit is part #TDR3500CA that you referenced. Timbren has confirmed for us that this does fit your truck. It fits a few years of the Ram trucks which might be why you've seen…

view full answer...

Answer 4

I looked up the payload capacity of your 2015 Ram 3500 single rear wheel diesel and it looks to be 4,140 lbs. So if you plan to carry around 4,000 lbs in the bed you should be fine. You'd also be fine to tow a 2,000 lb trailer as well.

view full answer...

Answer 5

Per Timbren The Suspension Enhancement System #T94VR comes with a 1 inch spacer, so with the included spacer the suspension system will be 7-1/4 inches, without using the spacer it is 6-1/4 inches. The system #T94VR does require at least 1/2 inch of…

view full answer...

Answer 6

The clearance that you will want between your truck frame and the rear axle for the Timbren Rear Suspension Enhancement System, #TDR3500CA, is either approximately 6-3/4 inches or approximately 7-3/4 inches (see photo). Once the Timbren springs are…

view full answer...

Answer 7

For the drivers side light to go along with the part #STL14RB that you referenced you would want the part #STL15RB. This is the matching light you are looking for.

view full answer...

Answer 8

Actually, the installation you show in your photos is exactly how it's supposed to be. I checked in with one the engineering folks at SuperSprings who manufacture the #SSR-301-47-2 Rebel Sumo Springs you installed. I forwarded them your photo,…

view full answer...

Answer 9

The correct Timbren kit for a 2004 Dodge Ram 2500 with slide-in camper is the Timbren Rear Suspension Enhancement System part #T94VR. I confirmed this with Timbren for you. This is the model designed for service applications.

view full answer...

Answer 10

I checked with Timbren, and these come with a 1 inch spacer, so with the spacer, the height of the kit Timbren Rear Suspension Enhancement System #T94VR is 7-1/4 inches; without the spacer it measures 6-1/4 inches. You mentioned having 6 inches, and…

view full answer...

Answer 11

The Timbren Suspension system that you will need for your 2011 Dodge Ram 3500 is part #TDR3500CA. All the hardware needed for installation and instructions will be included with the Timbren suspension enhancement kit. Installing the Timbren systen…

view full answer...

Answer 12

For your 2020 Ram 3500 the suspension enhancement kit we offer that provides the best blend of support and ride quality is the SumoSprings #SSR-301-47-2. The Timbrens do a great job reducing sag but they have a reputation as being a bit harsh whereas…

view full answer...

Correct Timbren Suspension Enhancement for a 2019 Ram 3500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching