Sliding 5th Wheel Hitch to Fit B&W Turnoverball Gooseneck Hitch
Question:
What capacity hitch would I need for a 5th wheel with a dry weight of 13,500lbs. I am looking for a slider that will mount to my BW gooseneck hitch.
asked by: Bill
Expert Reply:
The only way to know how heavy a hitch you need is to find the trailer's gross vehicle weight rating (GVWR) which is its maximum weight when fully loaded. There's likely a tag on the trailer that states the GVWR, or it may say on the trailer's documentation. You may also be able to contact the trailer manufacturer with the VIN to find its specs from when it was built.
As a last resort you can load the trailer and weigh it. Of course this requires you to get it to a scale and you still wouldn't actually know the trailer's GVWR. This is more of a last resort solution.
If you give me the year, make, and model of the trailer I may be able to find some information on it for you.
Since you have the B&W Turnoverbal gooseneck hitch the best fifth wheel hitch to use is the B&W Companion slider, part # BWRVK3400. It fits right into the gooseneck hole.
The Companion has a max capacity of 20,000 pounds so if you find your trailer is more than that then you'll need a different hitch. A good option is the Curt Q25 slider, part # C16566, using the adapter # DM6140 so it fits into your gooseneck hitch.
Products Referenced in This Question
Curt Q25 5th Wheel Trailer Hitch w/ R24 Slider - Dual Jaw - 24,000 lbs
- Fifth Wheel Hitch
- Sliding Fifth Wheel
- Above Bed Rails
- 6250 lbs Vertical Load
- 24000 lbs GTW
- Cushioned 360-Degree
- Standard - Double Jaw
- 17-1/2 - 21-1/2 Inch Tall
- 12 Inch Fore/Aft Travel
- CURT
more information >
Demco 5th Wheel Base Rails Adapter for B&W Turnoverball Gooseneck Hitches
- Gooseneck and Fifth Wheel Adapters
- Adapts Truck
- Gooseneck Hitch to Fifth Wheel Trailer
- No Offset
- Connects to Gooseneck Hole
- Fixed Height
- Hitch Adapters
- Demco
more information >
Product Page this Question was Asked From
B&W Companion Slider Gooseneck-to-5th-Wheel Trailer Hitch Adapter - Dual Jaw - 20,000 lbs
- Gooseneck and Fifth Wheel Adapters
- Adapts Truck
- Gooseneck Hitch to Fifth Wheel Trailer
- No Offset
- 20000 lbs GTW
- Connects to Gooseneck Hole
- Adjustable Height
- Hitch Adapters
- B and W
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Gooseneck to 5th Wheel Adapters
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Article: Adapters for Towing a 5th Wheel Trailer with a Gooseneck Hitch
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: B and W Companion Slider that Fits 2022 Chevy Silverado 2500 with OEM Pucks
- Article: Sidewinder with Rotating Turret for Short Bed Pickups
- Q&A: Trailer Hub Recommendation to Replace Dexter 8-155
- Q&A: Replacement Oil Seal for AL-KO 568303
- Article: Ram Trailer Tow Prep Package
- Q&A: What Info is Needed to See if Slider Hitch Fits Gooseneck Hitch in Truck Bed
- Article: Best 5th Wheel to Gooseneck Adapters (2023)
- Q&A: Will the B&W Companion Fit Into OEM Pucks on a 2024 Chevrolet Silverado 2500
- Q&A: How to Determine Correct Height Setting for 5th Wheel Hitch
- Article: Fifth Wheel Trailer Hitch Information and Installation Tips