Gauge Wire Used in the Hopkins Endurance 4-way part # HM48244

Question

Question:

What is the gauge of the wire?

asked by: Steve

0

Expert Reply:

For the Hopkins Endurance 4-way part # HM48244 the ground wire is 16 gauge and all other wires are 18 gauge.

expert reply by: Jameson C

0

Answer 1

I may have a few parts that you can piece together to install tail lights on the Curt Cargo Carrier, #C18100, but Curt does not offer a tail light kit that will fit this carrier. If you are interested in the slim LED lights, you could install two of…

view full answer...

Answer 2

For a 16 inch strip light that would be the brightest our best solution would be the Optronics part #BUL69CB that you referenced as it's the closest in length at 15 inches and is very bright. Our customers have reviewed this highly and have told…

view full answer...

Answer 3

I wish we still had access to the Shelby replacement parts but since they aren't currently around anymore there's nothing we offer that I can guarantee will fit. I recommend instead getting a new coupler such as #CT-3001-Z. I've left a…

view full answer...

Answer 4

The EZ Lock Trailer Coupler Lock for 1-7/8", 2", 2-5/16" Bulldog Collar-Lok Couplers #BLTL-20 is what I recommend for your style coupler as long as it fits the dimensions. This coupler is 3-3/16 inches wide and 4 inches tall. It is…

view full answer...

Answer 5

Channel Tongue Trailer Coupler #CT-3001-Z requires a 2 inch wide tongue but I recommend a boxed tongue and not C-channel so there is more support where it counts. Steel tubing at least 1/8 of an inch of wall thickness will do the trick. The length…

view full answer...

Answer 6

We still haven't and I wouldn't hold my breath waiting to find out. Most of the time when customers try out stuff they don't end up letting us know if it ended up working out or not. I'd suspect no though. I recommend simply replacing…

view full answer...

Answer 7

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 8

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 9

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 12

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Gauge Wire Used in the Hopkins Endurance 4-way part # HM48244

Product Page this Question was Asked From

Continue Researching