Can Redarc Tow Pro Elite Brake Controller Install in 2015 Volkswagen Touareg with 7-Way

Question

Question:

I want to install the Redarc Tow-Pro Elite Trailer Brake Controller - 1 to 3 Axles - Proportional on my vehicle. I have the factory 7-way trailer wiring already installed. I have done some reading and it seems like I am also going to need a relay. Can you please advise exactly the parts that I will need and also install instructions? I contacted Redarc and they sent me back to you guys. Thanks in advance for your expertise.

asked by: Victor J

0

Expert Reply:

The Redarc Tow Pro Elite part # RED44FR that you referenced can be installed in your 2015 Volkswagen Touareg and would be an excellent option for a brake controller but there are a few relays needed to install the controller that you'll only be able to find at a Volkswagen dealer. If you check out the help article I attached to this page you'll see exactly what you'll need and how to source it. As well as how to install everything too.

expert reply by: Jameson C

0

Answer 1

The REDARC Tow-Pro Elite Brake Controller #RED44FR can be installed in your 2017 Audi Q7 but you will need additional harnesses only from Audi to complete the install. We don't have specific fit info for the knob or module on your vehicle as…

view full answer...

Answer 2

I would not recommend adding a receiver to the end of the Swagman Original Towing Bike Rack, #S64675. This bike rack comes with a hole that allows you to add a hitch ball with a 3/4 inch diameter like part #19256. If you want a 2 inch hitch ball,…

view full answer...

Answer 3

On the Swagman Original 4 Bike Towing Rack for 2" Trailer Hitches - Tilting #S64675, the distance from the hitch pin to the hitch ball is 25 inches center on center. If you want to measure all the way to the end, it will be about 26-1/2 inches…

view full answer...

Answer 4

In order to install the Carr Custom-Fit Side Steps - Hoop II #CARR102521, you may need to use pliers or vice grips to squeeze the bracket enough to get the nut started on the bolt, then torque down accordingly. This info was given directly from the…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 8

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 9

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 10

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 11

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 12

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Can Redarc Tow Pro Elite Brake Controller Install in 2015 Volkswagen Touareg with 7-Way

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching