Will the Thule T2 Pro XTB Fit on a Motorhome Towing a Tow Dolly
Question:
I would like to pull a tow dolly and use a Thule T2 Pro XTB 2 Bike Platform Rack with my Class A motorhome. I was looking at using the Curt Multipurpose Ball Mount with 2inch Receiver, Item # D210inch although Im concerned that the ball will be too high for a tow dolly. It is approximately 21inch from the ground to the center of the receiver tube of the motorhome. Will the Thule platform rack clear the tow dolly and towed vehicle and is the Curt ball mount height appropriate for a tow dolly.
asked by: Loyal S
Helpful Expert Reply:
You need to determine if the 2-1/4 inches of drop of the Curt # D210 is appropriate with your tow dolly. Find the difference from your 21 inch measurement on your RV's receiver and the distance from the ground to the bottom of the dolly's coupler. This is how you find the rise or drop you need in a ball mount. If the 2-1/4 inch drop of the # D210 works with this then you'll be fine.
You shouldn't have any issues using the Thule T2 Pro XTR, part # TH83JV, with the ball mount. You should make sure there's enough space between the receiver opening and the front of the car when it's on the dolly though. The bike rack is 41-1/2 inches from the hitch pin hole to its furthest point. So it'll reach 49 inches from the hitch pin hole on your motorhome's receiver all the way to the end of the rack.
If the # D210 won't work for you another option is a Gen-Y ball mount. I've linked our selection so you can see them and find the correct drop you need. The Gen-Y line is fairly heavy-duty so they're kind of extreme for what youi need but they could still work.
Products Referenced in This Question
Thule T2 Pro XTR Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount
- Hitch Bike Racks
- Platform Rack
- Tilt-Away Rack
- Wheel Mount
- Bike and Hitch Lock
- 2 Bikes
- Class 3
- Fits 2 Inch Hitch
- Carbon Fiber Bikes
- Electric Bikes
- Fat Bikes
- Heavy Bikes
- Thule
more information >
Product Page this Question was Asked From
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Built-In Dual Hitch
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: How do I use a Bike Rack and Pull a Trailer at the same time
- Q&A: Recommended Surge Brake Compatible Weight Distribution System for a 3,000 lbs Trailer
- Article: How to Carry Bikes While Towing a Travel Trailer
- Article: How to Measure for Trailer Hitch Drop
- Q&A: How To Carry Bikes While Towing a Boat Trailer
- Q&A: Will Champion Power Equipment 200961 Fit TorkLift Lock and Load SideKick Cargo Tray for 2" Hitches
- Article: How Level Should a Tow Bar Be When Flat Towing
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Recommended Way to Raise Height of Hitch Cargo Carrier
- Q&A: What is the Most Hidden Hitch for a 2024 Volvo XC90 Recharge?
- Article: Best Bike Racks for Electric Bikes
- Q&A: Can a Dual Hitch Adapter and Hitch Extender Be Used Together For Towing with a Bike Rack
- Article: Hitch Adapters and Extenders
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)