Overall Length of Gen-Y Torsion 2-Ball Mount 325-GH-1225
Question:
What is the overall length of this hitch? I am looking for a way to extend my tongue distance from my truck to increase turn radius. I need something rated at minimum of 12k
asked by: Brian
Expert Reply:
I went to our warehouse and measured the Gen-Y Torsion 2-Ball Mount # 325-GH-1225 for you.
From the center of the hitch balls to the nearest of the hitch pin holes the length dimension is 15-3/4-inches; the two hitch pin holes are spaced apart on center by 1-1/2-inches. Please refer to the photo I prepared for you with these dimensions indicated.
We offer a long standard 2-inch ball mount, part # BM20, is 13-1/4-inches from center of hitch pin hole to center of the ball hole but is rated for only 10,000-lbs.
We have the Draw Tite # 4285 that is 12 inches from center of hitch pin hole to the center of ball hole. It is rated for 12,000 pounds.
We also have the Curt # D-28 that is 14-1/4 inches from center of hitch pin hole to the center of the ball hole. It is rated for 6000 pounds. This mount has a 6 inch drop or 4 inche rise.
Products Referenced in This Question
Draw-Tite Ball Mount for 2" Hitches - 3" Rise, 4" Drop - 12" Long - 12,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Silver
- Drop - 4 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 12000 lbs GTW
- Class IV
- Long Shank
- Draw-Tite
more information >
Brophy Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 13-1/4" Long - 10K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- Brophy
more information >
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 4 Inch
- Fits 2 Inch Hitch
- 6000 lbs GTW
- Class III
- Long Shank
- CURT
more information >
Product Page this Question was Asked From
Gen-Y Torsion 2-Ball Mount - 2" Hitch - 2-1/2" Rise/7-1/2" Drop -16K
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 2 Inch Ball
- 2-5/16 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gray
- Drop - 7 Inch
- Rise - 2 Inch
- Fits 2 Inch Hitch
- 16000 lbs GTW
- Stacked Receivers
- Shock Absorbing
- Gen-Y Hitch
more information >
Continue Researching
- Shop: Demco Channel Tongue Trailer Coupler - eZ-Latch - Primed - 2" Ball - Weld On - 10,000 lbs
- Search Results: demco hitch
- Shop: Vehicle Sway Bars
- Video: Review of Gen-Y Hitch Hitch Adapters - Hitch Extender - GY89SR
- Shop: Safety Chain Loop for Trailer Hitch Receivers - 10,000 lb
- Shop: Gen-Y Hitch Hitch Extender for 2" Trailer Hitches - 14" Long
- Shop: CargoBuckle G3 Retractable Ratchet Tie-Down Strap - Flush Mount - 2" x 6' - 1,167 lbs
- Shop: Gen-Y Torsion 2-Ball Mount - 2" Hitch - 2-1/2" Rise/7-1/2" Drop -16K
- Shop: 24" Long Safety Chain with 1/4" S-Hook - 5,000 lbs - Qty 1
- Shop: CargoSmart Anti-Rattle D-Ring Tie-Down Anchor - Bolt On - 3/8" x 2-1/4" - 1,667 lbs
- Search Results: safety chain clevis
- Search Results: dem o
- Search Results: trailer safety chains
- Search Results: hitch extender
- Search Results: tie down straps
- Search Results: demco
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Replacing Parallex 7345 Converter to One that is Compatible with Lithium Batteries
- Article: How to Choose the Right Trailer Hitch Class
- Video: Roadmaster Dual Hitch Receiver Adapter Review RM-077-4
- Shop: Trailer Wiring
- Video: Titan Trailer Brakes T2385200 Review
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Recommended Replacement For A WFCO WF-8750P Power Center
- Shop: Suspension Enhancement
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Recommended Components for Off-Road Trailer Similar to Chevy Colorado Wheels