Replacement for Atwood Surge Brake Actuator 82541
Question:
You suggest replacing Atwood 82541 with Titan T63FR. Coupler is for a 1988 Correct Craft trailer for a Ski Nautique 2001 2,350 lbs. I never disengaged anything on the old trailer to back up. Would I need to use the manual lockout on the Titan coupler when backing up? Are bolt mounting holes the same on Titan as my old Atwood?
asked by: Mike
Expert Reply:
It sounds like you have free backing braking assemblies on your trailer so a lockout at the trailer coupler is not needed. In order to replace the Atwood Surge Brake Actuator 82541, I recommend using the Titan Leverlock Brake Actuator part # T43397007K although the Brake Actuator with Manual Lockout part # T63FR would work as well. The Leverlock is more cost effective and has an easier to use latching mechanism in my opinion.
The mounting bolt holes on the Leverlock are 3" apart but if they do not match what is on your trailer now you can always drill new ones.
Products Referenced in This Question
Dexter Brake Actuator with Manual Lockout - Bolt On - Drum - 2" Ball - 7,500 lbs
- Brake Actuator
- Surge Brake Actuator
- Straight Tongue Coupler
- Bolt-On
- 7500 lbs GTW
- 2 Inch Ball Coupler
- Drum Brakes
- Manual Lockout
- Dexter
more information >
Product Page this Question was Asked From
Dexter Zinc-Plated Brake Actuator - Drum - Multi-Fit Ball - Bolt On - 7,000 lbs
- Brake Actuator
- Surge Brake Actuator
- Straight Tongue Coupler
- Bolt-On
- 7000 lbs GTW
- 1-7/8 Inch Ball Coupler
- 2 Inch Ball Coupler
- Drum Brakes
- No Lockout
- Dexter
more information >
Continue Researching
- Shop: Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Dexter Zinc-Plated Brake Actuator - Drum - Multi-Fit Ball - Bolt On - 7,000 lbs
- Shop: Dexter Brake Actuator with Manual Lockout - Bolt On - Drum - 2" Ball - 7,500 lbs
- Search Results: axle
- Search Results: slipper spring
- Search Results: atwood 61101
- Shop: Dexter Brake Actuator with Manual Lockout - Bolt On - Drum - 2" Ball - 7,500 lbs
- Search Results: mbt58500~ln58
- Shop: 10-10 Grease or Oil Double-Lip Seals - Qty 2
- Shop: Brake Controller
- Q&A: Availability of Replacement Atwood 85841 Master Cylinder
- Search Results: idler hub
- Search Results: brakes
- Search Results: door lock
- Shop: CE Smith Grease Seals - 10174VB - Single Lip - Qty 2
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - 10" - Left and Right Hand Assemblies - 3,500 lbs
- Video: Review of Timbren Vehicle Suspension - Front Axle Suspension Enhancement - TFF350SDC
- Shop: Suspension Enhancement
- Q&A: Replacement for Atwood 61101 Brake Actuator
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2020 Mitsubishi Eclipse Cross
- Video: Review of Titan Brake Actuator - T4820000
- Shop: Gooseneck Hitch
- Video: Draw-Tite Max-Frame Trailer Hitch Installation - 2020 Subaru Outback Wagon
- Video: Curt Trailer Hitch Installation - 2017 Chrysler Pacifica
- Q&A: Replacement Surge Hydraulic Brake Actuator Recommendation To Replace Atwood 82541
- Video: HydraStar Hydraulic Brake Line Kit Review
- Video: Curt Trailer Hitch Installation - 2019 Ford Explorer
- Q&A: Recommended Surge Brake Actuator To Replace Atwood 82541 On 1098 Trail-Rite Boat Trailer