Replacement Tarp for Truxedo TruXport Soft Roll Up Tonneau Cover on 2009 Chevy Silverado

Question

Question:

I have a 2009 Chevy Silverado short bed that I need to replace the cover. The existing cover is marked 2711020110 is the Tx271101-CVR the correct replacement cover?

asked by: Jim

0

Expert Reply:

Based on the serial number 2711020110 from your TruXedo TruXport Soft Roll Up Tonneau cover the replacement tarp part # TX271101-CVR is the correct item.

For reference, the TruXedo TruXport covers that fit the various bed lengths of your 2009 Silverado are as follows:

5-1/2 Foot Bed # TX270601
6-1/2-Foot Bed # TX271101
8-Foot Bed # TX271601

I will be glad to re-confirm with TruXedo if you care to provide your date code from the cover, shown in the linked photo.

expert reply by: Adam R

0

click to enlarge

Answer 1

According to Truxedo, the date code is printed or handwritten on the underside of the tarp, usually on the passenger side up near the cab. The part number for the TruXport tonneau for your 2010 GMC Sierra 2500 short bed is #TX271101-CVR, but Truxedo…

view full answer...

Answer 2

I spoke with TruXedo and they were able to identify the cover you have as the TruXedo Original Tonneau Cover based on the side rail shape therefore the correct replacement tarp for you is the Replacement Tarp for TruXedo Original Tonneau Cover part…

view full answer...

Answer 3

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 4

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 5

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 6

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 7

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 12

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Replacement Tarp for Truxedo TruXport Soft Roll Up Tonneau Cover on 2009 Chevy Silverado

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching