Will Hopkins Adapter 7-Way Round Pin To 4-Way Flat # 47405 Fit a 2001 Land Rover Discovery II
Question:
Does this adapter for 2001 Range Rover? if not, do you guys carry such adapter? Thank you.
asked by: Arif S
Expert Reply:
The trailer wiring adapters are not vehicle specific. They are universal and will be matched by what type of connector is on the tow vehicle and what type of connector is on the trailer.
The Hopkins Adapter 7-Way Round Pin To 4-Way Flat, part # 47405, is for a vehicle that has a 7-Way round pin connector and you are connecting to a trailer with a 4-Way flat connector.
The 7-Way blade style connectors are more common than the 7-Way round pin connectors. I would check the 7-Way connector on your 2001 Land Rover Discovery II to determine if you have the 7-Way round pin design or the 7-Way blade design. I am including a link to a FAQ page that will show the difference in the trailer connectors. I am also including a picture that will show a 7-Way round and a 7-Way blade connector.
If you determine that it is a 7-Way blade connector, the adapter you will need is Pollak 7-Way Blade to 4-Way Flat Connector Adapter, part # PK12716.
If you can let me know what wiring connectors you are trying to connect I can help you choose the correct part.
Products Referenced in This Question
Pollak 7 Pole to 4 Way Connector Adapter
- Trailer Wiring
- Wiring Adapters
- Single-Function Adapter
- 7 Round - Blade
- Plug Only
- 4 Flat
- Pollak
more information >
Product Page this Question was Asked From
Adapter 7-Pole Round Pins To 4-Pole Flat
- Trailer Wiring
- Wiring Adapters
- Single-Function Adapter
- 7 Round - Round
- Plug Only
- 4 Flat
- Hopkins
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Video: Hopkins Wiring - Wiring Adapters - 47405 Review
- Shop: Adapter 7-Pole Round Pins To 4-Pole Flat
- Shop: Pollak 7 Pole to 4 Way Connector Adapter
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Search Results: kuat
- Search Results: 4 pin to 7 pin round adapter
- Shop: 7-Way to 4-Way/5-Way Trailer Adapter for Vehicles with Lamp-Out Sensors Towing Trailers with LEDs
- Shop: Hopkins Multi-Tow Trailer Connector Adapter - 7-Way to 5-Wire Flat/4-Wire Flat and 12-V Power Socket
- Shop: Loading Ramp for Kuat Piston Pro and Piston Pro X Bike Rack
- Shop: Curt Trailer Connector Adapter with Backup Alarm - 4-Way to 7-Way RV and 4-Way Flat
- Shop: Kuat Piston Pro X Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount
- Video: Optronics Trailer Lights - Clearance Lights - MCL67ARB Review
- Video: Hopkins 7- and 4-Pole Trailer Connector Socket Installation - 2020 Chevrolet Silverado 1500
- Video: Optronics Fender Clearance Trailer Light Review
- Search Results: 7 pole to 4 pole adapter
- Search Results: 7 pole connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 44649
- Video: Choosing the Right Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Hitch
- Search Results: 68149
- Video: Choosing the Right Brake Controller
- Article: Trailer Wiring Diagrams
- Shop: Brake Controller
- Video: Tow Ready 4-Pole Mounting Bracket Installation
- Search Results: 25580
- Q&A: How to Determine if Trailer Axle is Not Aligned and How to Measure to Replace Trailer Axle
on Trailer Wiring
Mike
2/26/2013
I need to start from my passenger taillite connector to install a7 blade plug on my bumper this is a 2003 discovery the starting point is a factory installed connection.Any reasonable priced suggestions?mike