Trailer Hitch for 2017 Jeep Wrangler Unlimited 75th Anniversary Edition

Question

Question:

Is there a hitch that will fit my 2017 1941 anniversary edition jeep? It has a filler if metal between the bumper and already has 4 bolts?

asked by: Jessica

0

Expert Reply:

There is! Your 2017 Jeep Wrangler Unlimited 75th Anniversary Edition should have what is called a Mopar Off-Road Bumper #82213654. For this the hitch we have that fits is the Draw-Tite # DT78MR, which is a Class III, 2" hitch.

expert reply by: Kyle S

0

Answer 1

If you have heavy mountain bikes, you are definitely going in the right direction of a hitch-mounted bike rack instead of a tire-mount rack. Since the current distance from the center of the hitch pinhole to the closest part of the Kuat Transfer V2…

view full answer...

Answer 2

The best solution would be to use a trailer hitch and hitch mount recumbent bike rack. For a trailer hitch I recommend the Draw-Tite, #DT78MR. The receiver on this hitch is a little longer which will help to clear the spare tire mounted on the back.…

view full answer...

Answer 3

Draw-Tite Max-Frame Trailer Hitch Receiver #DT78MR is rated for 675 pounds tongue weight so it by itself is more than capable of handling the Black Widow motorcycle carrier which weighs around 60 pounds or so. However, the tongue weight capacity of…

view full answer...

Answer 4

I don't know exactly how far the Draw-Tite hitch #DT78MR is going to stick out from your bumper but I can tell you that it's exactly 6-3/8 inches from the front of the mounting plate to the opening. The mounting plate itself is right at 3/4…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 10

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 11

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 12

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Trailer Hitch for 2017 Jeep Wrangler Unlimited 75th Anniversary Edition

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching