Will the Draw-Tite Sportframe # DT24950 Fit a Single Exhaust 2016 Audi A4
Question:
2016 Audi A4 S series- my already has a single exhaust was the exhaust port on the driver side. Does this impact the way that this gets mounts, will I have any problems?
asked by: Steve
Helpful Expert Reply:
Unless you have done some modifications that would put your exhaust in the way of the Draw-Tite Sportframe Trailer Hitch Receiver # DT24950 (see attached photo) you should be good to go.
I have also attached an installation video and the instructions for you to reference.
If you let me know what you will be using it for I can make some recommendations for you.
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited
- Q&A: Replacement Clearance Lights Needed for GLO-BRITE 122R and 122Y Lights
- Q&A: How To Convert A Wishbone Trailer Wiring Harness To A Regular 4-Flat Trailer Wiring Harness
- Q&A: 40' Wishbone Trailer Wiring With A Ground Wire Running Down Both Sides
- Q&A: Recommended Flat Towing System for 2017 Ford Explorer FWD with 3.5L
- Q&A: Needing a Jack to Mount to a 5 Inch Tall Frame Rail
- Article: 2023 Holiday Must Haves
- Q&A: Option to Replace Jensen JRV9000R
- Q&A: Recommended Replacement For A JVR9000R RV Stereo System With Three Cameras
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Will Flat Towing Blow Up Your Transmission?
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Hitch Receiver Sizes