Do Trailer Lights Sometimes Ground Through Mounting Hardware
Question:
Hello, I am looking for brake/turn/running lights for my Fleetwood E2 trailer. I have yet to take them out because the are riveted into the body. Are there lights that use the Rivets as the ground, they started working when i Bent the flange to the touch the rivit more securely. If so Is there an easy way to convert over. Or what replacement would you recommend.
asked by: Keith
Expert Reply:
There are quite a few trailer light assemblies that use the mounting bracket as the ground. This works because the mounting brackets typically get attached to metal surfaces that touch the trailer frame which is where the ground strap of the trailer wiring harness connects. You can run a jumper wire from the mounting hardware to the main ground wire of the trailer if you wanted to as well.
Product Page this Question was Asked From
Optronics LED Trailer Tail Light - Stop, Turn, Tail - Submersible - 10 Diodes - Round - Red Lens
- Trailer Lights
- Tail Lights
- Stop/Turn/Tail
- Round
- Recessed Mount
- Submersible Lights
- LED Light
- 4 Inch Diameter
- Red
- Optronics
more information >
Continue Researching
- Video: Optronics Sealed Thin Line Two-Bulb Trailer Clearance Light Installation
- Search Results: trailer fenders
- Search Results: trailer lights
- Shop: Black Bracket and Single Wire Plug for Thin Line Series Trailer Clearance and Side Marker Lights
- Shop: LED Trailer Fender Light - 2 Diodes - Amber and Red Lens
- Shop: Repair Kit for etrailer and Ram A-Frame Couplers - Trigger Latch - 2" Ball - 5,000 lbs
- Shop: Optronics ThinLine LED Trailer Clearance and Side Marker Light - Submersible - 4 Diodes - Amber Lens
- Shop: Single Axle Trailer Fender - Jeep Style - Aluminum Tread Plate - 13" to 15" Wheels - Qty 1
- Shop: Thinline LED Trailer Clearance or Side Marker Light - Submerisble - 2 Diodes - Amber Lens
- Shop: Repair Kit for etrailer and Ram Channel Tongue Couplers - 2" Ball - 3,500 lbs and 5,000 lbs
- Q&A: Why Does a Marker or Clearance Light Only Have One Wire
- Q&A: How To Ground 2 Wire Trailer Light that Replaces 1 Wire Trailer Light
- Q&A: How to Install New Trailer Lights that Only Have One Wire
- Q&A: Which Wires Are Used When Installing Marker Lights On Trailer
- Video: Optronics Trailer Lights - Clearance Lights - MCL65RB Review
- Video: Optronics Trailer Lights - Clearance Lights - MCL66RB Review
- Video: Optronics Trailer Lights - Clearance Lights - MCL66R24B Review
- Video: Optronics Trailer Lights - Clearance Lights - MCL65R24B Review
- Article: Trailer Wiring Diagrams
- Search Results: st18580d13
- Search Results: ring terminals
- Shop: Trailer Wiring
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Q&A: Should There Be Continuity Between Running Lights And Ground Circuit While Bulb Is Disconnected
- Q&A: 4-Way Trailer Connector that has 5 Wires
- Q&A: Troubleshooting A 7-Way Trailer Connector With A 4-Way Wiring Harness
- Video: Spectro Trailer Wiring Junction Box Installation
- Video: EZ Connector Wiring 319-R7-11 Review
- Search Results: bed rail kit
- Search Results: trailer plug