Will Backing Plate of Brophy D-Ring Tie Down Anchor # RR5K Prevent Anchor From Ripping Out
Question:
Looking to put a ring on with backing plate on aluma snowmobile trailer for my atv tie down. Just thinking that’s a lot of weight bouncing on the trailer,won’t it just tear a hole in the wood eventually? It’s just 1/2” sheets Thanks
asked by: Don
Helpful Expert Reply:
Depends on the condition of the wood but the backing plate of the Brophy D-Ring Tie Down Anchor w Backing Plate # RR5K that you referenced is designed to distribute the weight so that it does not easily rip through the wood.
I attached a picture of what the backing plate looks like installed. If the floor is strong enough for the weight of your snowmobile it's going to be strong enough for the backing plate to be effective.
Product Page this Question was Asked From
Brophy D-Ring Tie Down Anchor w Backing Plate - Bolt-On - 1/2" Wide - Recessed - 1,600 lbs
- Tie Down Anchors
- Trailer Tie-Down Anchors
- Truck Tie-Down Anchors
- Tie-Down Cleats and Rings
- 1600 lbs
- D-Ring
- Surface Mount - Bolt-On
- Brophy
more information >
Continue Researching
- Shop: BOLT Trailer Coupler Lock - 1-7/8", 2", and 2-5/16" Couplers - Ford Center Cut Key
- Shop: BOLT Covered Padlock - 2" Shackle - Codes to Ford Key
- Shop: BOLT King Pin Lock for 5th Wheel Trailers - Steel - 2" Collar
- Shop: BOLT brand vehicle and hitch locks
- Video: Brophy D-Ring Tie Down Anchor with Backing Plate Review
- Shop: Brophy D-Ring Tie Down Anchor w Backing Plate - Bolt-On - 1/2" Wide - Recessed - 1,600 lbs
- Shop: MORryde Suspension Upgrade Kit for Triple Axle Trailers - 2-1/4" Long Shackle Straps
- Shop: Trailer Wiring
- Shop: Brophy D-Ring Tie Down Anchor - Bolt-On - 4-7/8" Wide - Recessed Mount - 1,600 lbs
- Shop: Brake Controller
- Shop: MORryde Suspension Upgrade Kit for Triple Axle Trailers w Correct Track - 2-1/4" Shackle Straps
- Q&A: Is 3/4 Inch Plywood Floor Adequate for D-Ring Tie Down Anchors with Backing Plate for 3,000 lb Car
- Video: Redarc Tow-Pro Liberty Brake Controller Installation - 2021 Hyundai Palisade
- Shop: Trailer Hitch
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)
- Search Results: jack wheel
- Q&A: Torque Specification for 2-5/16 inch Ball in the Blue Ox Sway Pro Weight Distribution System
- Q&A: Tie Down Anchors Made In USA
- Q&A: What Is The Distance Between The Mounting Holes On The Buyers Products 5/8" D-Ring 337B40MP?
- Video: Brophy Tie Down Anchors - Trailer Tie-Down Anchors - RR5K Review
- Shop: Bug Shield
- Shop: Towing Mirrors
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2021 Hyundai Palisade
- Article: Trailer Wiring Diagrams
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2022 Hyundai Palisade
- Article: Determining Trailer Tongue Weight
- Video: etrailer Stabilizer Jack Review
- Search Results: c57202
- Search Results: trailer tester
- Search Results: trailer wiring tester